User manual

1
Monark 828 E
5
Product Information
Congratulations on your new Ergometer!
The adjustable brake system and the force can be set
and read Kiloponds (kp) and Newton (N). The actual
brake power is showed in Watts on the electronic
meter. The energy that a person has to develop over
time to overcome this braking power, can thereby
be calculated. The energy is usually expressed in kJ
(kilojoules) or kcal (kilocalories).
Ergomedic 828 E is also equipped with an electronic
meter that displays pedal revolutions per minute
(RPM), heart rate in beats per minute (HR), time in
minutes and seconds (TIME), speed in km per hour /
miles per hour (SPEED) and the distance travelled in
km / miles (DISTANCE). In addition braking power
can be set, giving a reading of calorie consumption
(CAL) and power in watts (WATT). The watt level
depends on pedalling speed, it can be fine tuned by
increasing or decreasing the speed or pedal rpm.
Each 828 E is calibrated at the factory. This means
that you can begin to use the ergometer directly after
assembly. However, if the user wishes to verify the
scale, please read the instruction for “Calibration” in
this manual.
Facts
Large, well-balanced flywheel 20 kg (44 lbs)
Pendulum scale, easy to calibrate
Adjustable saddle and handlebar
Stable frame, solid steel tube
Powder painted
Wheels for easy transport
Electronic meter with heart rate
Width
517 mm (20 1/3”) at handlebar
640 mm (25”) at support tubes
Length
1120 mm (44")
Height
945-1295 mm (37-51”) at handlebar
780-1105 mm (31-43 ½”) at seat
Weight
52 kg (114 2/3 lbs)
Max user weight 250 kg (551 lbs)
Included
Chest belt
Fig: Serial number (1)
NOTE!
Use of the product may involve considerable
physical stress. It is therefore recommended that
people who are not accustomed to cardiovascular
exercise or who do not feel completely healthy,
should consult a physician for advice.
PC software
If you need a pc software to do exercise tests on the
bike, our software is available for free download from
our website: www.monarkexercise.se.
Serial number
The serial number is placed according to Fig: Serial
number.