Setup guide

19
Networking the TriFIT 620 System
To network your TriFIT 620 system to other computers, whether they are another TriFIT
620 system, just TriFIT software or a full TriFIT 700 system, the same instructions apply.
You can designate one TriFIT computer as the “Server” and all the other TriFIT systems on
your network as “Clients”. The Server has the database that all the other TriFIT’s will be
sharing. The shared database can be on a computer that TriFIT is not installed on as well.
Since network hardware and software can vary widely the following sequence below is
offered as a general guideline.
1. Make sure the TriFIT program is installed on the computer you decide to make the
server. Again, a TriFIT machine may be used as the server for all the other TriFIT
clients.
2. Install the network license on the server by calling 800/717-2070 to be licensed over
the phone. (see previous section for licensing over the phone)
3. Run the Program HealthFirst TriFIT Database
Locator (DBLocate.exe) from every TriFIT client
computer you want to share the database with.