Setup guide

13
TriFIT Cart
A cart can be purchased with the TriFIT 620 so you may use your own computer, monitor,
keyboard and mouse. Follow the instructions in the previous Section 2: Installing your
TriFIT 620-Hardware Installation to connect the TriFIT 700iu to your computer.
The cart is pre-wired for the most common connectors for computer peripherals. If you
purchased a cart with your TriFIT 620 system, the 700iu box is attached to the top of the
CPU compartment at the factory as shown below right.
Common desktop
computer installed in the
CPU Compartment of the
cart (back view). Most
commonly used connectors
and wires are included.
The wires from the
peripherals of the CPU
come down the main cart
Tube and connect to the
back of the CPU. The
CPU with the 700iu box on
top fits nicely in the
compartment.
Your printer cables
can route down Main
Cart Tube also.
CPU Compartment
(it is open in the
back, see below)
Main Power Switch
700iu box
(Fits inside CPU
Compartment)
Caliper
Holste
r
Keyboard, Monitor,
Mouse cables can
route down main cart
tube.
Power Strip
Can be turned
on & off with
external main
switch on cart
(shown above
on left side of
the cart).