Setup guide

12
Blood Pressure
If a Blood Pressure option was purchased, you
will receive 3 cuffs; a Small, Standard and X-
Large.
To install the blood pressure connector into the
700iu box, firmly snap in the white or black
plastic connector as shown here.
You will need to set some defaults in the
TriFIT software to work with the Blood
Pressure unit in the next section.
Tanita BF-350 Bioimpedance
If a Tanita BF-350 Bioimpedance scale is purchased with your
TriFIT 620 system, you will receive a null modem serial cable that
plugs into either one of the device ports on the 700iu box or the
back of the computer. You will need to set the Body Compostion
Defaults under Environments (they only appear if you are licensed
for Tanita) to the correct serial port (or device Port), see the section
on Body Composition Defaults. Before using the Tanita with the
TriFIT System it will need to be in Remote mode: