Instruction manual

13
ELECTRONIC METER
Press any button or move the pedal to turn on the meter.
At the display for heart rate (HR) a © is lit which means that the meter is trying to find a pulse signal
from an external source (chestbelt with electrodes, not included. Our part.no 9339-91).
If the meter can not find such a signal this HR function is automatically turned off after 30 seconds.
When the function is turned off the © symbol is not lit any more.
The heart rate function can be turned on again by preessing a button.
Timer starts automatically when pedals are moved. Meter values for Time, Distance and Calories can be set to
zero by pressing the RESET button for more than 2 seconds.
To get correct raedings for calories and watts the kp value on the electronic meter has to be set to the same
value as the pendelum or the kp window to the left of the meter is showing. The watt reading in the display is
then depending on the pedalling speed. The watt reading can be fine tuned through increase or decrease the
pedalling speed.
Calories are calculated all the time.
Do not expose the electronic meter to direct sunlight or extremely high temperature. Do not use any
dissolvents when cleaning. Use only dry cloth.
NOTE: The batteries are at delivery in a separat package.
If the batteries have been stored for a long time, the battery power can be too low to show all functions
on the meter. If so, batteries must be replaced.
See REPLACEMENT of BATTERIES page 13.