Digital Video Capture Card DVC-Series USER’S MANUAL DVC – 4025 DVC – 1650 DVC – 16100 DVC – 16200 DVC – 400 RTC DVC – X AI DVC – 4 IO
Table of Contents Chapter 1. Chapter 2 Chapter 3. Chapter 4. Features ----------------------------------------------------- 4 System Specification Recommendation ----------------------------------------------------- 4 1.1 DVC Line-up ----------------------------------------------------- 5 1.2 DVC – 4025 ----------------------------------------------------- 6 1.3 DVC – 1650 ----------------------------------------------------- 7 1.
Chapter 5 Chapter 6 Chapter 7 4.4 Add To Bookmark / View Bookmark List ----------------------------------------------------- 47 4.5 Search setup ----------------------------------------------------- 49 4.6 Event Search ----------------------------------------------------- 50 4.7 Object Search ----------------------------------------------------- 51 4.8 Digital zoom ----------------------------------------------------- 52 5.
Features Max. 32-Ch camera inputs ( Only with 2 x DVC –16100 ) Display speed at max. 400fps / Recording speed at max. 200fps Provides Mpeg4 and MJpeg compression algorithm High resolution at 640x480 Max.
Chapter 1 DVC Hardware 1.1 DVC Line-up Prodcut Line-up Model DVC-4025 DVC-1650 DVC-16100 DVC-16200 DVC-400RTC Video Input 4Ch 16Ch 16Ch 16Ch 16Ch Display / Recording 25fps / 25fps 50fps / 50fps 100fps / 100fps 200fps / 200fps 400fps Monacor international Co., Ltd.
1.2 DVC-4025 Formation : one DVC-4025 board DI/DO Terminal TV Out Watchdog Terminal Camera Input 1 Camera Input 2 Camera Input 3 Camera Input 4 < DVC-4025 Board > Monacor international Co., Ltd.
1.3 DVC-1650 Formation : one DVC-1650 board + one 16-Ch BNC Cable TV Out Impedence Jumper Arrangment Impedence : match the impedence value of video signal to the analog TV monitor property. (Default) NC : no impedence matching from capture card. Camera Input Terminal For Back Panel Connetion DI/DO Terminal Audio Input Terminal To Motherboard Reset Terminal 16-Ch BNC Cable TV Out To PC Reset Switch Watchdog Cable Connection Monacor international Co., Ltd.
1.4 DVC-16100 Formation : one DVC-16100 board + one 16-Ch BNC Cable To Motherboard Reset Terminal To PC Reset Switch Watchdog Cable Connection Camera Input Terminal For Back Panel Connetion DI/DO Terminal Audio Card Connect Terminal 16-Ch BNC Cable TV Out Impedence Jumper Arrangment TV Out Impedence : match the impedence value of video signal to the analog TV monitor property. (Default) NC : no impedence matching from capture card. Monacor international Co., Ltd.
1.5 DVC-16200 Formation : one DVC-16200 board + one 16-Ch BNC Cable To Motherboard Reset Terminal To PC Reset Switch Watchdog Cable Connection Camera Input Terminal For Back Panel Connetion DI/DO Terminal Audio Card Connect Terminal < DVC-16200 Board> 16-Ch BNC Cable TV Out TV Out Impedence Jumper Arrangment Impedence : match the impedence value of video signal to the analog TV monitor property. (Default) NC : no impedence matching from capture card. Monacor international Co., Ltd.
1.
1.7 DVC - 400RTC + DVC - 16200 Formation : one DVC-16200 board + one DVC-400RTC Board + one BNC Cable + one Quad guide To Motherboard Reset Terminal To PC Reset Switch Watchdog Cable Connection DI/DO Terminal Audio Card Connect Terminal < DVC-16200 Board > TV Out 1 (Ch1~4) TV Out 2 (Ch5~8) TV Out 3 (Ch9~12) TV Out 4 (Ch13~16) Extra Quad TV Outputs (Optional) Camera Input Terminal For Back Panel Connetion < DVC-400RTC Board > 16-Ch BNC Cable TV Out Monacor international Co., Ltd.
1.8 DVC-4AI Formation : one DVC-16100 board + DVC-4AI < DVC-16100 Board > 60 Pin Connection Audio In 1-4 < DVC-4AI > 4ch RCA connection 4-ch Audio Board Capture Board Monacor international Co., Ltd.
1.9 DVC-8AI Formation : one DVC-8AI board + one DVC-16200 board < DVC-16200 Board > 60 Pin Connection RCA-toD-Sub Input Cable PCI Slot Monacor international Co., Ltd.
1.10 DVC-2AI Formation : one DVC-2AI + DVC-1650 + one flat cable Monacor international Co., Ltd.
1.11 DVC-1AI Formation : DVC-1AI board + one DVC-4025 + one AV cable Monacor international Co., Ltd.
1.12 DVC-4IO To DI/DO Terminal on capture board To Serial Port on PC PTZ Signal Cable RS422/485 Sensor Input Alarm Output [ Sensor Input Terminal ] [ Alarm Output Terminal ] 1. Connection 1. Connection Connect one signal lineto COM port and connect Connect both power lines to DO terminal Another signal line to the desired sensor number. 2. Operation 2.
1.13 4-Ch BNC Guide Connection to DVR Board A 4-Ch BNC Guide Black Red Yellow Blue Brown Orange Green Violet Detail of A Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Signal ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Ground ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Camera Input Terminal on DVR Board Line Color Matching to Each Pin on Terminal Pin No.
Chapter 2 DVC Software Monacor international Co., Ltd.
2.1 Driver Installation 1. Simply run “DVRDriverSetup.exe” in “Driver-2005-00-00” folder in CD-Rom provided. 2. Then DVR Device Driver Setup program will come out as shown below. Select one installation option.
2.2 DVC Program Installation 1. Run “Setup.exe” in the folder in the CD-Rom provided. 2. Click “Next” 3. Specify the destination to install and click “Next” Monacor international Co., Ltd.
4. Check on three options and click “Next” 5. Select the video type and click “Next” 6. Now installation is being performed. Monacor international Co., Ltd.
7. Now the installation has been finished. Click “Finish” to restart the system. 8. Then doubleclick “DVSS4” icon on the desktop to run the program. And the board type selection menu will come up. Check on suitable board type from the list and click “OK” Monacor international Co., Ltd.
9. Then “Recording Drive Setup” will come out. Select a drive available and select the recording type, “record or backup”. Then click “Apply” and OK”. 10. Then DVR program will run. Monacor international Co., Ltd.
2.3 Folders Created After DVR Program Installation The below folders are created after DVR Program installation. Folder Name Description Language Language files exist LogFile System Log files exist PanTilt PTZ Driver files exist Skin GUI skin file exists Sound Sound files (*.wav) used in DVR program exist Tools Utilities exist (Backup, Backup Player & CaptureClear) Update Temp folder for download when real-tim update WebPages Web files for web service exists 2.
2.5 Language Alternation You can customize the language used in Sentry DVR Program Setup by editing lanuage file in C”DVSS4\Language folder. Normally the initial language is English after the installation. Procedure 1. Go to “C”DVSS4\Language”. 2. Open “Lang.ENU.ini”. 3.
Chapter 3 Live Mode Monacor international Co., Ltd.
Important Notes Before Running DVR Program Before Operating DVR Program 1) Recycle Bin Setup Check on the box “Do not move files to the Recycle Bin. Remove files immediately when deleted.” in the property of Recycle Bin. 2) Display Setup - Set resolution at 1024x768 and High Color 16bit. - Set “System Standby”, “Turn off monitor” and “Turn off hard disk” at “Never” in Display Properties\Power Management Properties\Power Schemes.
3.1 Live Mode After running DVR program, the below GUI immediately executes. It displays the real-time images coming from the attached cameras and contains functional buttons for switching to other setup modes.
3.2 Selecting On Screen Division Button 1-Split ~ 36-Split Full Screen Mode PC Monitor Switching TV Monitor Switching Reset Screen Full Screen Mode Button ; hides all buttons and displays only video. To return, click wheel button on mouse. PC/TV Switching Mode Button ; video channels on PC and analog TV monitor will be switched in sequential order through selected screen division. Clicking on each screen division button switches videos manually on each screen division.
3.4 Screen Movement You can freely change the location of each screen by drag-and-drop on display screen. 1. Select the screen which you want to move to another location. CAM01 CAM02 CAM03 CAM04 CAM05 CAM06 CAM07 CAM08 CAM09 CAM10 CAM11 CAM12 CAM13 CAM14 CAM15 CAM16 Click 2. Drag the screen to the location that you want to move to. CAM01 CAM02 CAM03 CAM04 CAM07 CAM08 CAM16 CAM05 CAM06 DragCAM09 CAM10 CAM11 CAM13 CAM14 CAM15 CAM12 3.
3.5 Camera/Alarm-Out/TV-Out Panel 1. Camera Select Panel On each split mode of screen, clicking one channel button will show the split mode including the channel clicked. (ex : If on 4 split mode with 16 ch inputs, clicking no. 1 channel will display no.1 to 4 ch and clicking no. 5 will be no.5 to 8 ch.) In case of over 16 cameras connected, you can switch from no.1 to 16 to no.17 to 32 by clicking the arrow button on the right. 2. TV-Out Panel Shows the current channels sent to TV monitor.
3.6 Instant Replay This function enables the playback on one channel selected for the recent time selected while on live mode. 1. Click the camera view that you want to play. 2. Press Instant Replay Button. 3. Then playback for the selected channel will be run in pop-up window on live mode as shown below. 4. To change the previous time of reply (1 to 60min), select from pull-down menu. The change will effect from next run.
3.7 Emergency Recording This function enables the current recording mode to switch to continuous recording and higher frame rate recording while the button is pressed in the emergent case. The default frame rate for emergency recording is 5fps. 1. Emergency Recording Setup should be done first.. 2. You can enter the Setup by moving to “Recording Schedule Setup\Emergency Recording Setup” or right-mouseclicking on Emergency Recording Button.
3.8 System Lock This function switches to password protection mode after the button is pressed. 1. Press Password Lock Button once. Whole function modes will require password input afterward. 2. In order to enter ID and PW when asked for. One default ID (Administrator, Manager and General) can be chosen from the pull-down list. Or you can write your own ID registered on User Registration Menu. 3. To be released from Password Lock Mode, press the button once again and complete ID and PW confirmation.
3.9 Manual Back-up This function is for manual backup to the specified folder in local hard drive, CD-RW, DVD Writer or CD-Rom. 1. Simply press Manual Back-up Button. 2. Then the below backup program will run. Select the recording files to back up after search. Specify the period / video channles with recordings and click search Automatic search period select Click each title in order to sort files by subject.
Specify the folder in local or network hard to back up recording files. If DVR or CDRW is installed, press DVD or CDRW. Back : start backup procedure AVI Backup : back up selected files to AVI format Concerning backup method to DVD or CD-RW, refer to the CD-RW backup manual seperately. Backup Stop : provided stop backup procedure Exit : exit from Backup Menu To view backup recording files, use DVSS4Player.exe from C:\DVSS4\Tools. See page 58 to know the usage.
3.10 E-map This function is to create and view e-map in which locations of the cameras, sensors, and alarms are displayed. Creating E-map 1. Run Edit E-map from Control Setup. Then E-map Editor will run. 2. Right-click on Server icon in Map Tree Bar and select Load Image. 3. Select the image file to be used for E-map (BMP, Jpeg or GIF images can be used). 4. Drag camera, DI and DO icons from Server Tree Bar and drop on the desirous postion in the image. Used icons are displayed with yellow box.
5. Use right-mouse menu on icons on map to rotate cameras, use different type icons, rename or delete icons. 6. Save the changes of the e-map. Monacor international Co., Ltd.
Viewing E-map 1. Press E-map from live mode. 2. Then locations of cameras, sensors and alarms are displayed on the map. And motion and sensor events are displayed in red flash. 3. To view the live image, click each camera icon. Or to activate the alarm use right-mouse menu on DO icons. Monacor international Co., Ltd.
3.11 Voice Communication While the users monitor the remote DVR from Remote Client Program, they can talk with the personnel at the DVR site through internet using this two-way voice communicaton function. Make sure that your PC speaker and microphone are properly connected to Line-out and MIC port on soundcard. 1. Setup From DVR Server For two-way communication, Voice Network option must be checked on from Network Setup. Enter the name you desire to display in Voice Communication Program.
2) Then Wizard will be testing sound hardware. 3) Test the microphone and speaker volume and press Next when done. 4) To complete, press Finish. Monacor international Co., Ltd.
5. Using Voice Communication Program Upon pressing Voice Communication Button from from your side, the below program will appear. Select the connected user. And press button to send your voice to the other side. Send Your Voice Exit Stop Sending Your Volume Level View connected user’s information When the other side presses the same button, you can receive the voice from the other side then.
Chapter 4 Search Mode Monacor international Co., Ltd.
4.1 Search Mode By clicking search mode button, you shift from display mode to search mode where you can playback the recording images. Default is no image with 4-split mode. Click play button and select your desirous split mode.
4.2 Print Images To print the images being displayed, simply press PRINT button. Double-click each image to select the images to print. Set printing options as you like. Then click PRINT utton. 1 3 2 5 Image selected 6 7 1. Recording date : shows the date and time of recording image 2. Printer Selection : enables the selection of printer installed on your Windows 3. Copy Count : can select the number of copies that you desire to print 4. Image Border : creates border line of paper used 5.
4.3 Save Images To BMP/JPEG/AVI To save the images being displayed, simply press SAVE button. Double-click each image to select the images to save to BMP/JPEG/AVI. Set the options as you like. Then click SAVE button. 1 2 4 3 Image selected 5 6 7 8 1. Destination : specifies the folder where the files are saved. 2. Format : can select the format of images saved (BMP, JPEG or AVI) 3. Save Info : check to display the image information of the image saved 4.
4.4 Add To Bookmark / View Bookmark List Add To Bookmark 1. Select the specific camera view and click “Add To Bookmark Button” 2. Enter the remarks in the blank. And clieck “Add”. 3. Then the bookmark will be saved on the bookmark list. View Bookmark List 1. Click “View Bookmark List Button” to search and view bookmarks 2. Select specific channel or whole channles, and the period to search bookmarks. 3. Click “Search”. Then bookmarks will be listed as shown below. Monacor international Co., Ltd.
4. Select one bookmark and click “Go”. Then the selected image will be played in one-split mode. To delete the bookmark , select one and press delete button. You can select multiple bookmark by using Ctrl or Shift Key together. To edit the remak of the bookmark, press “Edit” and change the remark. Monacor international Co., Ltd.
4.5 Search Setup You can select the recording information to be displayed on playback video. Monacor international Co., Ltd.
4.6 Event Search This function allows user to search motion or digital-input event recording on the selected date, 1. Press “Event Search Button” from Search Option Menu. 2. Select the date and the channel to search event. Then select event type (motion or digital-input). 3. Press “Search Event”. Then search result will be shown as below. 4. Select one event and press “Play Event” to play on preview screen. Press “Stop Event” to stop playing. Monacor international Co., Ltd.
4.7 Object Search This function allows user to search the movement of object in the particular area selected on the date/time selected. 1. Press “Object Search Button” from Search Option Menu. 2. Select the channel and date/time to search object. 3. Press “Add” and draw regions on preview screen. To delete regions, press “Delete” and just draw rectangular regions on the current regions drawn. To delete all regions, simply press “Delete All”. 4. Press “Search”.
4.8 Digital Zoom You can zoom in the part of video image and get the still image or printed out. 1. Select area by dragging the mouse on video. 2. Press Zoom In button to get magnified image. 3. Blur or sharpen the image using Blur or Sharpness button. 4. Save to BMP/Jpeg image or print out using Save or Print button. Monacor international Co., Ltd.
Chapter 5 Setup Mode Monacor international Co., Ltd.
5.1 Setup Mode Setup mode allows you to adjust schedules and system properties and more. In order to enter setup mode, simply click SETUP botton. 5.2 System Setup 1 2 3 4 6 5 7 1. System Information : shows the details of your system. Use the scroll bar to view the content to the end. 2. Disk Information : shows current recording and backup drives setup. 3. System running mode : selectable between “normal mode” and “DVR mode”. 1) Normal mode : loads desktop items before running DVSS4 program.
5.2.1 Recording & Backup Drive Setup When you run DVR program first after installation, Recording Drive Setup will pop up, where you can set the recording and backup drives. In order to add the recording & backup drives to the current setup, enter SETUP Mode. Then click DISK MODIFYING button in system setup menu. 1. Select the drive displayed in the list by clicking on it. 2. Then select the recording type among recording or backup. Click apply. 3.
5.2.2 User Registration User IDs can be created in this menu in order to limit local DVR access and remote access Simply click User Registration button in System Setup menu. Sentry DVR program is initially set to Adminstrator ID, which can control all functions. 1. Registering New User ID Double-click on the User ID column, and enter new ID / Password. And select one User Level among 6 levels. Additional 27 new User IDs can be registered, which makes total 30 User IDs.
4. Setting User Level In order to set authority of indivisual User Level, click each User Level and check on the box of each fuction as below. - System Option : includes system shut-down, playback, pan/tilt, screen rotation and lock control. - Menu Option : includes the menus available from System Setup. - Network Option : includes the functions available from remote access applications. - Live Camera : limits viewing specific video channels on local live mode.
5.3 Camera Setup Camera Setup mode allows you to set camera functions indivisually. There are three functional parts, General, Motion & Color and Pan/Tilt. 1 2 1. You can select indivisual camera button to set its property by clicking on it. Doubleclick on camera button will repeat activation and inactivation of each channel. After program installation, only no.1 channel will activate. Therefore, all camera buttons should be doubleclicked indivisually.
5.3.1 Setting General Camera Property In order to set general camera properties, click GENERAL SETUP button and select each camera icon on the above. 1 2 3 4 5 1. Camer Name : enter the camer name desired to be displayed on the image. The font color can be change by clicking color button on the right end. 2. Display Camera Name : check on the box to display the camera name. 3. Enable AV Out : check on the box to allow the camera to be view through TV monitor. 4.
5.3.2 Setting Motion & Color Properties In order to set motion & color properties, click MOTION & COLOR SETUP button and select each camera icon on the above. Color setting preview window Back to default color Brightness control Contrast control Hue control ChrU control ChrV control Motion sensitivity Display Motion Area Draw On All Area Delete On All Area Motion sensitivity test Brush Size Adjust 1. Setting Color Move the below slide bars in order to get color setting that you desire to have.
5.3.3 Setting Pan/Tilt In order to set pan/tilt properties, click PAN/TILT SETUP button and select each camera icon on the above. 1 2 3 4 5 6 7 9 8 1. RX Type Selection : Select the model of RX. 2. Out Port Selection : Select the COM port which connects to converter. 3. RX Address : Select the Address No. which exactly matches with one of the RX. 4. Pan Invert : Check on the box to make pan direction inversed. 5. Tilt Invert : Check on the box to make tilt direction inversed. 6.
5.4 Schedule Setup Schedule Setup mode allows you to set recording schedule for each camera. 1. Select camera no. to set schedule. And drag and drop the mouse on the specific DAY and TIME zone to set schedule. Check on “All Time” if you want draw zone on whole area. 2. Set the detailed recording options.
Click Action button to select alert mode when motion event occurs. - Display Motion Areas : makes motion area blue shaded - Sound Alert : makes beep sound through PC speaker - E-mail : sends e-mail with captured image to registered address (Refer to E-mail Setup) Alert delay time setting is 5 to 30 sec - Pop-up : displays one full screen of the camera view with motion event Pop-up time can be set for 5 to 30 sec - Phone Alert : calls to registered no.
Pre-event Recording : Record more key frames specified (0-2 key frames) ahead the frame with event. Post-event Recoring : Record more seconds specificed (1-10 seconds) after the frame with event. Min. Audio Level : 0 to 25 You can repeat the step 1 to 4 in order to set schedule on multiple DAY and TIME zones. 5. Click Exit button to save and exit. Monacor international Co., Ltd.
5.5 DI Surveillance DI Surveillance Setup mode allows you to set DI surveillance schedule for each DI. 1. Select DI no. to set schedule. And drag and drop the mouse on the specific DAY and TIME zone to set schedule. 2. Check on alert option in order to send alert upon motion event. - Sound Alert : makes beep sound through PC speaker - E-mail : sends e-mail to registered address (Refer to E-mail Setup) Alert delay time setting is 5 to 30 sec - Phone Alert : calls to registered no.
5.6 Network Setup Network setup mode enables you to set every network-related properties. ○,1 ○,2 ○,3 ○,4 ○,5 ○,6 ○,7 ○,8 ○,9 Fehl 1. Lan : check on to allow video image transmisstion through TCP/IP. Default video port is 8100. If you want to change, enter another port no. And restart the program. 2. Web : check on to allow remote access through web browser Default web port is 80. If you want to change, check on “Port Setting Option” and enter new port no.
7. Dynamic DNS : In case of using dynamic IP or private IP, you can Dynamic DNS service. 1) Unless you have DDNS ID/PW, you can move to DDNS register menu by pressing DDNS Register Button . Then below DDNS Register Menu will show up as below. 2) Enter the ID that you like to register. Then press “ID Check”. If the ID is available, enter Password, Email, DVR Name and DVR Location. Then press “Done”.
If the DVR is behind the router or firewall (IP is private IP), you can check on “Shared IP” option. Then public IP information in the DVR will be automatically updated every 50 minutes by default setting. When the IP changes more prequently, users can adjust automatic update time by themselves. Adjustable time is 10 to 60 minustes. For manual IP update, you can press “Dynamic DNS Update” button . Please make sure to forward the video and web port (8100 and 80 if unchanged) to the DVR from router.
5.7 Control Setup 1 2 3 5 4 6 7 8 12 9 10 11 13 15 14 1. Server ID : Enter Server ID that you desire to have. 2. Video Format : Select the correct video format used in your area. 3. Alarm Sound : Can select the WAV file which gives alert through PC speaker upon events. Or you can use default. 4. Sensor List : Shows sensor list. You can enter the name of sensor instead of DO##. And can select the type Open (Normal Open) or Closed (Normal Closed). 5. Alarm-out List : Shows alarm list.
7. E-mail Setup : 1 2 3 4 5 6 7 1) Outgoing Mail Server : Enter SMTP mail server that the mail will be sent through 2) Authentification Method : Select authentification method 3) Account Name : Enter the account name 4) Account Password : Enter the account password 5) Encoding Method : Select the suitable one with your language 6) User Mail Address : Enter you mail address 7) E-mail : Enter e-mail addresses which get e-mail report upto 10 nos upton the below events.
13. Record While Searching : Check on the box to record while searching 14. Edit E-map : creates e-map file. (See page 25 E-map) 15. POS Enable : check on to connect POS. And configure in the setting. 7 Monacor international Co., Ltd.
5.8 Backup Setup You can set automatic backup schedule for video channels selected in this menu. 1. Check on “Perform Backup” to perform backup scheduled in order to enable scheduled backup. 2. After checking on “ Every day, Every week or Every Month” for backup cycle, set date, day or time. 3. Check on “Before one day, Before one week or Before one month” from Option. Then 24 hours data on the selected dat will be backed up by specified cycle. 4. Select the video channels that you want to backup 5.
Chapter 6 Program Tools Monacor international Co., Ltd.
6.1 Capture Clear Tool This tool can be utilized to reselect model type when you changed the capture board to other different model board from the system or you selected wrong type of board. 1. Close DVSS4 program. Simply run CaptureClear.exe from C:\DVSS4\Tools. 2. Press OK to cancel the current model selection. 3. Then CaptureClear Success message will show up. Monacor international Co., Ltd.
4. Then you can select capture board model again from the below menu when running DVSS4 program. Monacor international Co., Ltd.
6.2 External Player Tool This tool can be used for viewing recording file backed up by DVSS4Backup.exe. 1. Run DVSS4Player.exe from C:\DVSS4\Tools. 2. Select the folder where backup files exist. Monacor international Co., Ltd.
3. Doubleclick on the file you want to play from the list. Use Select Camer pull-down menu to search from the specified video channel. 4. Then DVSS4Player will run instantly. Speed play from +16X to -6X Export to BMP or Jpeg snapshot image Separate External Player Install version is availabe to play from other PC without DVR program. Monacor international Co., Ltd.
6.3 Index Builder Tool This tool can be used when you cannot see the current recoring time/date history from search menu footage by index file curruption. 1. Close DVSS4 program. Run IndexBuilder.exe from C:\DVSS4\Tools. 2. Select on Recording Drive and press Build Index Button. 3. After the rebuilding process, complete message will show up. The more recoding files exist, the longer the rebuilding time takes. Monacor international Co., Ltd.
6.4 Watermark Verification Tool This tool can be used when you need to verify if the watermark-applied image file is genuine. 1. Run “DVSSWaterMark.exe” from C:\DVSS4\Tools. 2. Load the digital watermark-applied BMP file. 3. Press “Check” to verify. When the image is verified to be genuine, “Watermark Approved” message will appear. When the image is verifed to be forged, “Watermark Corrupted” message will appear with forged area highlighted. Monacor international Co., Ltd.
Monacor international Co., Ltd.
Chapter 7 Network Function Monacor international Co., Ltd.
7.1 Remote Client Program You can view the images from remote site using Remote Client Program. First install Remote Client Program using setup file in the cd-rom provided. After the installation, run DVSS4Client.exe or DVSS4 Client shortcut created on the desktop. Then the below display mode will come out.
7.2 Connecting From Remote Client Program In order to server, just click CONNECTION BUTTON. Then the below dialog box will come out. 1. Select Server Name from the list. 2. Enter ID and Password, which should be registered on User Registeration Setup from server side. 3. Click connection button in order to connect. 4. Click cancel button to cancel. LAN check box from Network Setup on server side should be checked on to allow remote access.
7.3 Client System Setup 1 2 3 4 5 1. Recording Drive Information and Setting You can set the drive where real time images transferred from server are recorded. 2. View System Log : Displays the system log file. 3. View Event Log : Shows the below event history created from server side instantly [ Event Log Viewer ] 4. Use Smar Update : Check on to run Smart Update upon start-up of DVSS4 Client 5. Execute Smart Update Now : Click the button to run Smart Update now Monacor international Co., Ltd.
7.4 Client Option Setting 1 2 3 4 5 6 7 8 1. Dislay Rotation Time : Set the time interval between each screen when auto switching mode (1 – 30 seconds) 2. Display Camera Name : Shows the camera name on the camera view 3. Display Frame View : Shows the frame rate on the camera view 4. Event Log Recording : Records the event history created from server side on the log file (The event histories are recorded in C:\DVSS4Client\LogFile named like Event2003XXXX.log) 5.
7.5 Registering Server List For the connection through TCP/IP Enter the name that you desire to have Enter IP address or DDNS ID. Enter the port no. for video data transfer. Default is 8100. Check when the server is registred to DDNS. Enter the port no. for audio transfer. Defaulit is 8200. Enter the port no. for two-way voice communcation. Default is 8500. Delete Button Select Com port no.
7.6 Viewing Remote Recordings In order to view remote recordings, just click SEARCH BUTTON. Then the below dialog box will come out. Select date & time. Then click OK to continue remote playback. 1. Date Selection Menu The date having recording is displayed colored. Click the date that you want to search from. 2. Search Time The time having recording is displayed colored (FPS:Green, Motion:Blue, Alarm-In:Orange). Move the red bar to the time that you want to play. 5. OK 3.
7.7 Viewing Through Web Browser Type IP address of the remote DVR or http://godvr.net/DDNS ID from web brower. Press “Enter”. Ex) If IP address is 211.211.204.205, URL is http://211.211.204.205. If DDNS ID is dvr, URL is http://godvr.net/dvr. Enter ID/PW from the dialog box. Press Connect button. Then web client page will show up. LAN and WEB check box from Network Setup on server side should be checked on to allow web client access.
When ActiveX download is blocked from Win XP SP2, please follow the below steps. 1. Open Internet Properties. And press "Custem Level" from "Security" tab. 2. Check on "Prompt" under "Download unsigned ActiveX controls". Press OK. And press OK from Internet Properties. 3. Then prompt window will be shown to ask if users wants to download ActiveX controls for running web client. Monacor international Co., Ltd.