User manual

4 & 8 & 16 Channel DVR Operation manual Revision 1.0

z MENU: Press button to access Main Menu. Press again to return.

5. Direction/select button

z UP: Used to move the cursor up; change possible values in the setup menu; under

PTZ control sub menu, used to move camera; or used to adjust focus.

z DOWN: Used to move the cursor up; change possible values in the setup menu; under

PTZ control sub menu, used to move camera; or used to adjust focus.

z LEFT: Used to change possible values in the setup menu. Under PTZ control menu,

used to move the camera left or used to do Zoom Out; At playback mode, used to

decrease playback speed.

z RIGHT: Used to change possible values in the setup menu. Under PTZ control menu,

used to move the camera left or used to do Zoom In; At playback mode, used to

increase playback speed.

z OK: Used as a selection key. Under PTZ control menu, used to be interchanged P/T

mode with Z/F mode

6. Jog/Shuttle

z Shuttle: Multi-speed forward/reverse playback. Under Network Setup sub menu,

used to input parameters fast.

z Jog: Frame by frame search.

7. IR receiver

z Remote control signal receiver

8. Playback

z RECORD: Press once to begin recording all active channels. Press again to end recording.

z R-PLAY: Reverse Playback. Press to begin reverse playback. Under PTZ control menu,

used to decrease the speed of Pan, Tilt, Zoom, Focus.

z STOP: Stop playback.

z PLAY: Access to playback.

- Playback button will activate assigned starting position and Channel at playback setup of

menu.

- At pause mode, it will release pause mode.

- Under PTZ control menu, used to increase the speed of Pan, Tilt, Zoom, Focus.

9. USB connector in the front panel

z This connector is for USB Memory stick to back up the image