User manual

101
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Still image will be saved in a path of which is established in RAMS_M4’s setup section screen
① Select check box in order to insert watermark into still image capture
② Save still image as user defined default file name if chosen
③ Save still image as user selected new file name if chosen
④ Insert keyword to user easy searching
⑤ Close still image capture window
⑥ Print still image capture file
⑦ Save still image. The destination of recording is assigned at still image recording folder
through setup menu among RAMS_M4 program
4.4.5 Input water mark
Click the Water Mark checkbox then push the save button to save still image with watermark.
4.4.6 Printing still image
To print still image, please push the button in capture screen. Then use this
button in main page. But In the motion picture state, this button only is
applicable to pause or temporarily pause mode.
4.4.7 Moving picture file playback, playing, pause, temporarily pause, move
by interval of frame, fast forward Playing
Playing-back image file