Operation Manual
User Manual
19
5.2.7 System Function
5.2.7.1 Time Set
5.2.7.2 Password
The [System] Menu includes the below sub-menus: Time
Set, User Password, Audio/Video Setting, Language select,
System Info and System Maintenance.
After entering into the [System], you can configure the
system to meet your needs.
.
Click the [Main menuξSystemξDate/Time] in turn to Enter
into the time setup menu shown as Picture 5-41 to not only
modify system date, time, date/time format and time zone, but
also setup DST (day saving time) status and mode.
This option allows you set the device ID for the DVR and set
the system password if you want to use one. The new passwords
will be available after clicking [APPLY] button.
.
When you set Password Enabled to βONβ (shown as Picture
5-43), you can setup a user password and administrator password
respectively. The password supports up to 6 characters.
MD AREA: This option allows you select the area you want to be
sensitive to motion. The channel is separated into a 13*10 area. When
any object moves into the motion detection area, and the area where
the object is located is displayed in red recording will be triggered. In
the semi-transparent area the motion detection is off.
Picture 5-42
Picture 5-43
Picture 5-39
Picture 5-40
Picture 5-41