Instruction manual

2. Press Talk button, when the indicator lamp of Talk and microphone is on, talking can begin.

3. Lamp color definition of conference mode status.

3.1 Red Light On：Chairman Mode

3.2 Orange Light On： FIFO Mode

3.3 Green Light On： Override Mode

4. Chairman Mode: While pressing the “TALK” button by the chairman, the ring of LED and talk

indicator lamp of delegate microphones are flashing with RED color, once the chairman permits

speaking, and the ring of LED will be automatically turned to red color without flashing, the delegates

can speak now.

5. FIFO Mode: The 1

prepared speaker will see his microphone’s LED ring and talk indicator lamp

start flashing with RED color, once the last one finished speaking; all the lamps will be automatically

turned to red color without flashing. Now it’s his turn. The 2

prepared speaker and next ones will

see their microphone’s LED rings and talk indicator lamps start flashing with ORANGE color, once

the 1

prepared speaker finished speaking, the lamps of the 2

one will be automatically turned to

orange color without flashing, and so on.

6. LCD can display the MIC ID Code (including MIC in use/request/line-up) and the conference mode.

7. The gooseneck microphones are separate with the stand to facilitate the installation, repair and

maintenance in general condition as well as the transportation, storage and assembly.

8. Hidden wiring is adopted with CS-200YC. There is a hidden configuration slot for connector in the

stand. Holes can be drilled under the stand when installed, which will enable hidden wiring and

maintain the appearance of the conference hall nice and neat.