Instruction manual

30
Before voting, five lamps will be on simultaneously, which mean the voting can be executed. For
strengthening the confidentiality, when you press the button, the corresponding red lamps will be
flashing twice and then disappeared immediately which indicate the successful voting. When voting
is stopped, all five lamps will be start flashing which indicate the system is calculating the votes,
once the calculation is finished, it will stop flashing.
7. The voting results could be seen on the LCD of Graphic Control Software and the LCD of
chairman/delegate display, only the voter’s selection cannot be seen. Before all the five lamps
flashing, the selection can be changed.
8. LCD can display the MIC ID Code (including MIC in use/request/line-up) and the conference mode.
9. The gooseneck microphones are separate with the stand to facilitate the installation, repair and
maintenance in general condition as well as the transportation, storage and assembly.
10. Hidden wiring is adopted with CS-200YC fast cord. There is a hidden configuration slot for connector
in the stand. Holes can be drilled under the stand when installed, which will enable hidden wiring and
maintain the appearance of the conference hall nice and neat.