Instruction manual
29
3.1 Red Light On：Chairman Mode
3.2 Orange Light On： FIFO Mode
3.3 Green Light On： Override Mode
4. Chairman Mode: While pressing the “TALK” button by the chairman, the ring of LED and talk indicator
lamp of delegate microphones are flashing with RED color, once the chairman permits speaking, and
the ring of LED will be automatically turned to red color without flashing, the delegates can speak
now.
5. FIFO Mode: The 1
st
prepared speaker will see his microphone’s LED ring and talk indicator lamp start
flashing with RED color, once the last one finished speaking; all the lamps will be automatically turned
to red color without flashing. Now it’s his turn. The 2
nd
prepared speaker and next ones will see their
microphone’s LED rings and talk indicator lamps start flashing with ORANGE color, once the 1
st
prepared speaker finished speaking, the lamps of the 2
nd
one will be automatically turned to orange
color without flashing, and so on.
6. Execute voting function－ this function can be enabled only when the chairman main control unit is
configured with graphic control software. The voting buttons are hidden in the voting cabin, which can
be opened while voting is required. When voting is finished, the cabin can be covered to maintain the
simple and grace appearance of the conference microphones.
a. The definition of each button is as follows:
b. Voting Mode: ○,
1
:Yes ○,
2
: No ○,
3
○,
4
○,
5
: Abstain
c. Electing Mode: ○,
1
: 1 ○,
2
:2 ○,
3
:3 ○,
4
:4 ○,
5
:5
d. ○,
1
: ++（Strongly agree） ○,
2
: +（Agree） ○,
3
: 0（No opinion）○,
4
:-（Disagree） ○,
5
:- -（Strongly
Disagree）
Two ways of Voting: Registered or Ballot
Registered:
Before voting, five lamps will be on simultaneously, which mean the voting can be executed. Press
the button you want and the corresponding red lamps will be constantly on which indicate the voting
is successful. When voting is stopped, all five lamps will be start flashing which indicate the system
is calculating the votes, once the calculation is finished, it will stop flashing.
The voting results and voter’s selection could be seen on the LCD of FCS 6170 Graphic Control
Software. Only can the LCD of chairman/delegate display as followings:
T
:
x
x
x
A
:
x
x
x
1
:
x
x
x
2
:
x
x
x
3
:
x
x
x
4
:
x
x
x
5
:
x
x
x
【T：Total voters】 【A：Abstained voters】 【1：Voters for No.1】 【2：Voters for No.2】
【3：Voters for No.3】 【4：Voters for No.4】 【5：Voters for No.5】
Ballot: