Instruction manual

23
4.10. Video Auto Switch
4.10.1 Multi-image overcome display switch: with a multiplexer, images from multi-camera can run
auto-overcome display.
4.10.2 Setting:
Press “MODE” button  switch ” ◘” to 9. VIDEO AUTO SWITCH（on the 6
th
page）  ( ) will be shown
beside YES  press “STEP” to switch YES(auto-overcome)/NO(shown with divided screen).
After above setting is done  it is a must-do to press ”SAVE ” button to save the setting value of speed
dome camera (or the setting won’t be modified)  LCD displays as below.
S
a
v
e
.
.
.
.
.
.
.
.
.
O
K
4.11 Voting Mode Settings
4.11.1 This series has the “Voting” mode. There are two following methods of operating this function:
4.11.1.1 Chairman Microphone equipped with LCD can execute the voting functions with registered
or ballot. The voting results of ballot will be displayed on the equipped LCD Chairman/
Delegate Microphone. On the contrast, you need to have “FCS 6170 Graphic Control
Software” to display the voting results of registered.（Please refer the following MIC unit
instruction for detailed operations）
4.11.1.2 To execute the “Voting” function with registered or ballot need to be connected with “Graphic
Control Software.” （Please refer to Graphic Control Software Operating Instructions）
9
◘
V
I
D
E
O
A
U
T
O
S
W
I
T
C
H
(
Y
E
S
)
N
O