Instruction manual

22
CHECKING MIC (Checking correct microphone ID): Under “Test” status, it will test only those
microphones connected.
MIC COUNTER（All microphone connected）： Under “Test” status, it will be displayed the number of
microphones connected correctly
ERROR（Error MIC ID Code）： Under “Test” status, it will be displayed error ID codes.
※If the numbers of microphones are increased or reduced, you have to repeat step 4.8.2.1,
and then the system will be automatically scanned and detected all the microphones. The
numbers of microphones and their ID code will be recorded in the system.
4.9. Speed Done Return
4.9.1 Activate/ deactivate speed dome camera auto-return (HGO) function. (Please refer to 4.6.11
for HGO setting.)
4.9.2 How to activate/ deactivate:
Press “MODE” button  switch ” ◘” to 8. SPEED DOME RETURN（on the 5
th
page）  ( ) will be shown
beside NO  press “STEP” to switch YES/NO.
After above setting is done  it is a must-do to press ”SAVE ” button to save the setting value of speed
dome camera (or the setting won’t be modified)  LCD displays follow information.
S
a
v
e
.
.
.
.
.
.
.
.
.
O
K
8
◘
S
P
E
E
D
D
O
N
E
R
E
T
U
R
N
Y
E
S
(
N
O
)