EYE-02 User‘s Guide GSM Security Camera EN EN User‘s Guide JR_EYE-02.ENG.MAN.Manual.19.
Camera EYE-02: User‘s Guide A 10 Battery cover 6 GSM Antenna 2 7 Power button 8 AC adaptor socket PIR motion sensor EN 3 Green light 1 Camera lens B 4 Red light 9 USB connector 5 Infra red illumination Package content: 1 EYE-02 camera 2 Battery 3 Remote control 4 Instalation CD 6 Screwdriver 5 USB cable 7 Wall mounting screws 9 AC adapter 10 Connecting cable 8 User manual II. JR_EYE-02.ENG.MAN.Manual.19.
I���� I���� ............................................................................. 3 4.5 GSM Network Setting ......................................................14 1. EYE-02 C����� - I����������� ............................... 3 5.1 Call Control ........................................................................15 5.2 Night View .........................................................................15 5.3 Monitoring .......................................................................
2. C����� I����������� User‘s Guide Before installing the camera, ensure you have a SIM card provided by your GSM operator with an activate EDGE/GPRS internet connection and MMS service. Some SIM cards are protected by PIN code. It is necessary to disable the PIN code protection of the SIM card. To do this, insert the SIM into your mobile phone and disable the PIN security code. If this is not observed, the EYE-02 camera may not operate correctly. EN 2.
• Plug the power adaptor to a wall socket. The camera will automatically turn on. Wait 30 seconds and check the EYE-02 camera LED lights on the front panel. Enroll your mobile phone and remote control to the camera User‘s Guide Plug the power cable to the camera. EN Call the camera number from your mobile phone. On the remote control, press the button . 3. C����� F������� 3.1 W������ M���� The EYE-02 camera has three main working modes: SLEEP, WATCH and CONFIG.
ENROLL WATCH CONFIG SLEEP TEST User‘s Guide REPORT Remote control navigation Camera Mode WATCH EN SLEEP LED lights signaling Acoustic signal Lights are Off. One long beep Green light is permanently On. Two long beeps CONFIG Red and Green lights blink slowly together. Three long beeps ENROLL Red and Green lights swap blinks slowly. One short beep ERROR Red light is permanently On1.
3.4 P������� The EYE-02 camera allows fast and simple setting of all necessary detector parameters by selecting one of the predefined PROFILEs. These profiles are suitable for most camera applications. If necessary, the profile may be further adjusted by the user. HOME � OUTDOOR OUTDOOR profile fits best camera installation outside your home.
3.5 D�������� The EYE-02 camera integrates a wide range of detectors. This sophisticated solution of combining various types of detectors enables the user to protect the desired area from a wide range of threats. This chapter briefly describes individual detector principles necessary for a correct setting of detection. � PIR motion detector (PIR) User‘s Guide PIR detector (Passive InfraRed sensor) or a Human Body Detector is the most common type of professional security systems detectors.
From: +555123456 ---------+555123456 Ca ll S +555123456 ARC From: eye-02@... To: Mr.James Subject: Alarm --------------------Attachments: Video.avi e-mail ARC database Ximuracerum terunterem co in tuitatus is? terunterem co in tuitatus is? MM S S Security agency SM SM EN http://ARC...
3.7 SECURITY SETTINGS Camera is not protected by any password in the factory settings. Without setting a password the camera processes incomming SMS messages or receives calls only from phone numbers stored in Contacts. It is possible to setup two passwords. For password setting or changing use JabloTool or configuration SMS commands (chapter 4.2). User‘s Guide � Remote Access Password This password protects any access to your camera (SMS, JabloTool).
JabloTool WEB SERVER Internet EYE-02 connection with JabloTool WEB EN 4.2 SMS C������� Basic EYE-02 camera functions can be operated by text message (SMS) commands sent to the camera. Commands are accepted only when sent from a mobile phone number stored in the contact list. If the EYE-02 camera is protected by the Remote Access Password or the Configuration Password, each SMS must be introduced with the appropriate password. Using the password the camera can be operated from any phone.
COMMAND User‘s Guide ON / OFF DeviceX / DeviceY EN � DESCRIPTION If the camera is enrolled to a wireless relay, this command switches its programmable output. This command works only if output is switched into sms on/off or pulse control mode. Example: OFF DeviceX Switches OFF DeviceX Example: 1234 ON Sprinkler 100s Switches ON „Sprinkler“ output for 100 seconds Device names DeviceX/DeviceY can be renamed in Jablotool. Possible Action is ON and OFF only.
User‘s Guide EN Jablotool Desktop - events list There are many types of event records. The most important are ALARM reports, which are reported to the contacts from the contact list immediately. Other types of records are the ALERT records (similar to ALARM, but ALERTs are not reported to the contacts) or some technical reports (Example: information about the AC power failure). 4.
User‘s Guide Please consider that even though the size of MMS and email is limited to 300 kB and 1 MB respectively, sending such MMS or e-mail may take up to several minutes according to your local network conditions. To reduce the file size and fasten sending you can choose a lower image resolution, snapshot interval or recording duration. EN Jablotool DESKTOP - video recording configuration 4.5 GSM N������ S������ The EYE-02 camera needs correct settings of some GSM network parameters.
5. O���� F������� 5.1 C��� C������ The EYE-02 camera provides a basic control function when it is called from a user’s phone. When a phone saved in the contacts calls the EYE-02 camera, the camera answers the call and plays the basic navigation menu: Welcome to Camera menu: To listen to the sound from the camera microphone................................ press 1, to receive an MMS with a current picture.................................................
5.5 B������ The EYE-02 camera has an internal backup Li-Ion battery, which allows operating in case of the loss of AC power. If used in any of the predefined profiles, the backup battery allows the camera to operate for approximately 24hours. Any individual sensor configuration may shorten this period accordingly. User‘s Guide In case of active MIP sensor, the backup time may be as short as 40 % of the original value.
5.8 E������� W������� D������ The EYE-02 camera has a built-in short range radio transceiver, which allows communication with a wide range of professional security wireless devices from OASiS system produced by JABLOTRON ALARMS (see www.jablotron.com). User‘s Guide This is a very simple way to extend your camera function to provide additional services such as: • heating control by a mobile phone • PANIC button function for elderly or disabled people.
7. T�������������� JABLOCOM will periodically release new versions of the EYE-02 camera software as well as the JabloTool software. Visit www.jablocom.com to find the latest version of the EYE-02 camera firmware, supporting software and detailed guide to troubleshooting.
8.1 B������ I���������� Temperature Issues To reach the optimal parameters the battery should be kept in an environment between 5 °C and 35 °C. Exposing the battery to extremely cold or hot temperature will reduce the battery capacity and lifetime. A battery’s performance is particularly limited in temperatures below 0 °C. The backup time will shorten significantly and also charging will take longer time.
8.2 W������� User‘s Guide Hereby, JABLOCOM s.r.o., declares that this EYE-02 GSM Camera is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The original conformity assessment document can be found at the web site www.jablocom.com.
8.3 S����� I����������� You alone are responsible for how you use your device and any consequences of its use. Do not switch the device on wherever the use of a wireless device is prohibited or when it may cause interference or danger. Small Children Do not leave your device and its accessories within the reach of small children or allow them to play with it. They could hurt themselves or others, or could accidentally damage the device.
User‘s Guide Do not paint your device or its accessories. Do not expose your device or its accessories to open flames or lit tobacco products. Do not expose your device or its accessories to liquid, moisture or high humidity. Do not drop, throw or try to bend your device or its accessories. Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories. Do not expose your device or its accessories to extreme temperatures, minimum -10 and maximum +55 degrees Celsius.
C Wireless devices: Controlers 2 personal HELP! button remote control User‘s Guide 1 EN 3 4 wall button doorbell button Detectors Sirens 9 5 motion detector 6 door (window) opening detector 7 smoke detector 10 11 8 gas leak detector JR_EYE-02.ENG.MAN.Manual.19.C-2A For more information about internal siren outdoor siren relay 12 thermostat - 23wirelles devices see www.jablotron.cz III.
D User‘s Guide 1 2 Inside parts: Short range radio • 868 MHz band • Allows cooperation with remote control and detectors • Compatible with JABLOTRON professional wireless security system GSM antenna 7 GSM module • Picture transfer to mobile phones via MMS or e-mail • Data connection to monitoring servers and ARC 8 Buzzer • Built-in acoustic indicator Tilt and vibration detector • Protects against intruder manipulation with camera 9 EN Infrared LEDs • Illuminates the scene by non-visible IR bea
