Owner`s manual

117
EQUIPMENT — 5
2008 LAPALMA XL
entertaInment SyStem
NOTE:
Operation of the entertainment
components is accurate at the
time of printing. Due to changes
in the entertainment equipment
(manufacturers and models), and
possible changes in the electrical systems
of the motorhome, operation of various
entertainment components may vary
from what is printed.
Viewsonic Television:
Pressing the Input button on the remote
control will bring up the following Input Source
Menu. To view the television or play a DVD,
for example, the appropriate source must be
selected.
Input Sources:
TV = Analog (NTSC) TV tuner operation.
This setting is for receiving Analog TV
signals.
DTV = Digital (ATSC) TV tuner operation.
This setting is for receiving Digital TV signals.
HDMI = HDMI (High Denition) operation
(not used). This setting is for use with a High
Denition A/V signal source. Refer to television
OEM manual for instructions.
YPbPr = Component video. Select this
setting to view a DVD.
AV = Composite video. Select this setting to
view optional digital satellite.
S-VIDEO = 5 pin din, S-Video connection,
similar to component video (not used).
Connect to A/V device. Refer to television OEM
manual for instructions.
VGA = Computer VGA monitor connection
(not used). Connect to computer VGA. Refer to
television OEM manual for instructions.
To Watch Main Television (Viewsonic) from
the Antenna:
On the video selector box press the
television antenna POWER button ON.
This provides +12 Volt power to the
television antenna amplier located
inside the antenna housing.
Press the TV ANT button located in the
area marked MAIN TV.
Turn on TV.
Go to set-up menu and select Air (Tuner
Mode). Initiate a channel search for all
available channels in the area.
Push Input button to display Input
Source Menu. Using arrow on remote
control to select appropriate TV and
press the enter button.
For Home Theatre sound press Speaker
switch to Home Theatre. On DVD player
press source button until AUX 1 appears
in window.
Select desired TV channel.
Use volume control on DVD player to
select desired sound level.








To Watch Bedroom Television (RCA) from
the Antenna:
On the video selector box press the
television antenna POWER button ON.
This provides +12 Volt power to the
television antenna amplier located
inside the antenna housing.
Press the TV ANT button located in the
area marked TV2.
Go to set-up menu and select Air
(also called TV or Mono by some
manufacturers). Initiate a channel search
for all available channels in the area.
Press TV/VIDEO button on television to
TV, or on the remote control press Input
button to TV.
Select desired TV channel.
Use volume control on TV to select
desired sound level.
NOTE:
To receive local channels television must
be on Air (also called TV or Mono by
some manufacturers) setting found in
the set-up menu and a channel search
initiated to scan available channels in
area. Refer to television OEM manual
on how to receive all available channels
in the area.
NOTE:
The picture quality from the outdoor
television antenna varies by location
of the station in relationship to the
antenna. If picture quality is poor and
there is no external power supply, try
turning the television Antenna Power
button located on the control box OFF
and ON.





