Owner`s manual

APPLIANCES — 4
96
2008 LAPALMA XL
Inlet located in living
room area.
031264f
031264d
Ensure the
bag seal is
secure over
the inlet
tube.
031264c
Motor Filter:
Check before
replacing bag.
central vacuum (optIonal)
Operation
Plug into shore power
or start generator.
Lift lid on wall
receptacle to start
vacuum. Insert the hose
in the receptacle and
release lid.
Connect desired
attachment on hose and
start vacuuming.
NOTE:
Consult vacuum OEM manual for
detailed operation and maintenance.
Maintenance
Vacuum has a thermal protector built into
the motor to prevent overheating. If motor will
not operate, it will automatically reset in about
½ hour. If motor brushes or bearings are worn
out, the circuit protector will trip off again after
a short period of time. If this happens, contact
a qualied service representative. Depending
on oor plan, the vacuum is located in either a
roadside or curbside compartment.



Changing the Bag:
To keep your vacuum at top
efciency, change the lter bag
at regular intervals. To maintain
cleanability, replace lter bag when it is
about ¾ full.
1. Unplug the power unit from
grounded outlet.
2. Rotate the bag cover
counterclockwise and remove
cover.
3. With a nger on each side of the
inlet, slide the bag off the inlet
tube.
Counterclockwise
to unlock for
removal.
Clockwise to lock.
031264