Owner`s manual

2008 KNIGHT
113
2008 KNIGHT
EQUIPMENT — 5
Aladdin Operations
The chassis battery disconnect switch must be
on. The Aladdin will function with the ignition
switch in the ACC, On or Ignition position.
INFORMATION
If the ignition is in the ACC or On
position Aladdin gives only limited
information with some screens
appearing with no information
(“xxx”). For Aladdin to give complete
information, the engine MUST be
running.
Aladdin™ Main Menu
When the system
rst powers up,
Aladdin will display
the information
screen or camera that
was last used when
the system was turned
off. To access the
main menu, press the
Voyager select (CA. SEL) button and scroll to
the main menu screen.
When the main menu is accessed, press the
Aladdin up or down buttons to scroll through the
main menu. An arrow indicates the current menu
item. Press the select or right button to enter that
menu item. Press the left button to return to the
previous screen.
Voyager Monitor
To view Aladdin information screens, the rear
view camera, or (optional) side cameras the
Voyager monitor must be ON. Once the Voyager
monitor is operating press the (Voyager) select
(CA. SEL) button to scroll camera(s) or to view
the Aladdin main menu screen.
Turning off the ignition will cause both the
Aladdin and the Voyager monitor to turn off.
In addition, when the Voyager monitor is
ON, placing the transmission in reverse will
activate the rear view camera displaying it on
the monitor. For motorhomes equipped with
the (optional) side cameras, activating a turn
signal will select that corresponding side camera
displaying it on the monitor. Turning the hazard
lights ON will show the rear view camera on the
monitor.
Voyager Select Button:
Use the select (CA. SEL) button on the
Voyager monitor to scroll through the various
screens. The screens can include (depending on
options): rear camera, left and right camera, and
an Aladdin main menu screen.
Viewing Camera(s):
The rear view camera or (optional) side
cameras can be viewed in any main menu
heading. Simply press the Voyager select (CA.
SEL) button to scroll to the various camera
views.
Coach Info
Coach Info
displays current
available engine and
transmission data.
Compass heading,
time, and temperature
are displayed on each
screen.
By pressing the select or right button an engine
information screen appears, press the select or
right button again and “No Signal” screen will
display, press select or right again to access the
engine/transmission screens.
There are ve engine/transmission screens
each displaying four parameters of data. A
sixth screen displays outside and basement
temperature. The screens automatically scan,
approximately every six seconds, or press the
select or right button to activate scanning.
Press the up or down buttons to move through
the screens and disable automatic scanning.
Press the select or right button to resume
automatic scanning. Press the left button to
return to the previous screen. Continue pressing
the left button to return to the Main Menu.
020195o
020195p