User guide

Assembling TSX Momentum Components
58
870 USE 101 00 V.2.2
Disassembling a Processor Adapter from an I/O Base
Overview
This section contains safety precautions and a procedure for disassembling a
Processor Adapter from an I/O base.
Tools Required
A flat-head screw driver.
Procedure:
Disassembling
an Adapter from
an I/O Base
Follow the steps in the table below to remove a Processor Adapter from an I/O
base.
Continued on next page
CAUTION
ELECTRICAL CIRCUITRY MAY BE EXPOSED
Before removing an adapter from the base, disconnect the wiring connectors. Make sure
that the I/O base is not under power when it does not have a Momentum adapter mounted
on it.
Failure to observe this precaution can result in injury or equipment damage and will
void the product warranty.
Step Action
1 Choose a clean environment to disassemble the unit, in order to protect the
circuitry from contamination.
2 Make sure that the I/O base is not under power by removing the terminal
connectors from the I/O base.