User guide

Saving to Flash with Concept
320
870 USE 101 00 V.2.2
Saving to Flash,
Continued
Procedure
Follow the steps in the table below to save to Flash:
Continued on next page
Step Action
1 From the Online menu on the main menu bar, select
Connect
.
Result:
The Connect to PLC dialog box appears.
2 Select the correct parameters to connect with your PLC. Under Access Level,
select the radio button to
Change Configuration
.
3 Click
<OK>
.
Result:
The Connect to PLC dialog box disappears and Concept connects to
your PLC.