User guide

Using Peer Cop with Concept
870 USE 101 00 V.2.2
313
Defining the References for the Next Node
Overview
We now want to attach the Concept 2.1 programming panel to the 171 CCS 760 00
TSX Momentum M1 CPU at Modbus Plus address 3 and create a similar Peer Cop
for this device to communicate with the supervisory PLC at Modbus Plus address 1.
In this case, we want the M1:
to send 16 words of specific output to the supervisor.
to receive the last seven words of global input from the supervisor. (Remember
that the supervisor will be transmitting a total of 10 contiguous words of global
data over the network.)
Continued on next page