User guide

Using Peer Cop with Concept
310
870 USE 101 00 V.2.2
Specifying References for Input and Output Data,
Continued
Defining the
Specific Output,
Continued
Continued on next page
Step Action
2 Since you are addressing the device at address 1, you will use the line for Source
1. Type the value
400023
on that line in the Dest. Ref. column.
3 Type the value
8
in the Length column, indicating that 8 words of data will be
exchanged. In this case, we will leave the default BIN setting. Click
<OK>
.