User guide

Using Peer Cop with Concept

870 USE 101 00 V.2.2

309

Specifying References for Input and Output Data

Overview

We will now set up the 171 CCS 760 00 TSX Momentum M1 CPU at Modbus Plus

address 2 to:

send eight 4

registers of specific output to the supervisory computer at

Modbus Plus address 1.

receive five 4

registers of global input data from the ATRIUM supervisor.

These registers are the first five registers in a 10-register block of global

outputs broadcast by the supervisory controller.

Note:

For this example, we will use the default values for Health Timeout (500 ms)

and Last Value (Clear on timeout).

Defining the

Specific Output

The following table describes how to define the specific output, starting from the

Peer Cop dialog box.

Continued on next page



Step Action

1 Click on the Specific

Output...

button.

Result:

The Specific Output dialog box appears.