User guide

Configuring an M1 CPU with Concept
870 USE 101 00 V.2.2
259
Establishing Configuration Extension Memory for Peer Cop,
Continued
Procedure
From the PLC Configuration screen, follow the steps below to enable Peer Cop and
adjust the amount of Configuration Extension memory:
Continued on next page
Step Action
1 From the Configure menu, select
Config extensions
OR double-click anywhere
in the Config Extensions region of the screen.
Result:
The Configuration Extension dialog box appears.
2 Click the check box next to Peer Cop, then click OK.
Result:
Peer Cop status changes from Disabled to Enabled in the PLC
Configuration screen.