User guide

870 USE 101 00 V.2.1
241
IV
Concept
At a Glance
Purpose
This part describes how to configure an M1 CPU, how to I/O map an I/OBus
network, how to configure a Modbus Plus network with Peer Cop and how to save
to Flash using Concept 2.1.
In This Chapter
This part contains the following chapters:
For Information On ... See Chapter ...
Configuring an M1 CPU with Concept
9
I/O Mapping an I/OBus Network with Concept
10
Configuring a Modbus Plus Network in Concept with Peer Cop
11
Saving to Flash with Concept
12