User guide

Using Peer Cop with Modsoft
870 USE 101 00 V.2.2
219
Configuring a Node to Exchange Data,
Continued
Procedure,
Continued
Next Step
Confirming the Peer Cop summary information.
Step Action
2 If the value in the Node field is 1, as in our example, press
<Enter>
.
Otherwise, enter the value
1
in the Node field to indicate that you will access the
CPU at address 1. Then press
<Enter>
.
Result:
The Add Node popup disappears, and the Peer Cop summary information
values are set as follows: