User guide

Using Peer Cop with Modsoft
870 USE 101 00 V.2.2
213
Completing the I/O Device Configuration in Peer Cop,
Continued
Completed
Screen: Node 3
The completed Peer Cop screen for node 3 should look like this:
Completed
Screen: Node 4
The completed Peer Cop screen for node 4 should look like this:
Note:
The lengths (LEN) for the 32-bit I/O devices at addresses 4 and 5 need to
be specified as 2 words (32 bits).
Continued on next page
