User guide

I/O Mapping an I/OBus Network with Modsoft

870 USE 101 00 V.2.2

185

Editing the I/OBus I/O Map

Overview

The maximum number of modules which can be I/O Mapped on the I/OBus network

depends on your Processor Adapter:

You may use up to 16 IOBUS screens to map your I/OBus network. Each page

allows you to enter up to 16 I/O base and/or InterBus I/O modules.

The first column on the screen tells you which page you are on.

Procedure

To enter I/O bases or Interbus I/O modules in the I/OBus I/O Map, perform the

steps in the following table.

Continued on next page

Processor Adapter Max. Modules Max. I/O Bits

171 CCS 760 00 128 2048

171 CCC 760 10 256 4096

Step Action

1 Place the cursor in the Module column in row 1 (for NODE 01

)

and push the

<F8>

key OR

Result:

A list of I/O names appears, as shown below. This list includes model

numbers for the available Momentum I/O bases and Terminal Block I/O modules. It

also includes a series of InterBus Module Identifier codes (see list at the end of

this section).