User guide

Configuring an M1 CPU with Modsoft
166
870 USE 101 00 V.2.2
Section 7.3
Modifying Communication Port Parameters
Overview
Purpose
The communication parameters on the Modbus ports are set at the factory. This
section describes how to access the Port editor and how to edit the default
parameters.
In This Section
This section contains the following topics.
Topic
Accessing the Port Editor Screen
Parameters Which Should Not Be Changed
Changing the Mode and Data Bits
Changing Parity
Changing the Baud Rate
Changing the Modbus Address
Changing the Delay
Changing the Protocol on Modbus Port 2