User guide

48245-EN.fm/9Schneider Electric
1
70 CPS 111 00
An optional power supply, the 170 CPS 111 00, is available for the Momentum
product family. Normally, power for controller, option, and communication modules
is obtained from the power supply built into the I/O bases modules. However, the
170 CPS 111 00 provides a power solution for applications requiring conversion from
230 or 120 VAC to 24 VDC. The supply mounts alongside the other Momentum
components on the DIN rail. The jumper-selectable, 230/120 VAC. power is input
to the power supply with the use of a spring- or screw-type terminal strip; the 24 VDC
power is output to the system in the same manner.
A power supply consists of the following components:
1 Fill-in identifying label.
2 LED status display.
3 Input voltage (AC) terminal stripconnector mounting slot.
4 Output voltage (DC) terminal stripconnector mounting slot.
Description
Characteristics
Model 170 CPS 111 00
Input voltage
VAC 120 or 230 (jumper selectable)
Output voltage
VDC 24
Maximum output
A 0.7
External fuses 120 VAC
input voltage
A 0.63, time lag
230 VAC
input voltage
A 0.315, time lag
References
Designation Description Reference Weight
kg (oz
Power supply 230 or 120 VAC.
170CPS11100
0.284 (10)
Terminal strips
(set of three)
With spring terminals
170 XTS 012 00
–
With screw terminals
170 XTS 011 00
–
Momentum automation platform 0
M1 processor adapters
Power supply
1
3
2
4
Description,
characteristics,
references