User guide

48245-EN.fm/5Schneider Electric
Momentum automation platform 0
M1/M1E processor adapters
Environment
Type of processor 171 CCC 760 10 171 CCC 780 10
Temperature operating
°C 0...60
storage
°C - 40...85
Relative humidity
5...96% (non-condensing)
Altitude
m 2000 (6,500 ft.)
Mechanical withstand
(immunity)
to vibrations
57...150 Hz @ 1 G
10...57 Hz @ 0.075 mm d.a
to shocks
+ 15 G peak, 11 ms, half sine wave
Designed to meet
UL, CE, CUL, FM Class 1 Div. 2, NEMA 250 Type 1, and IP20 conforming to IEC52
Characteristics
Central processing unit (CPU) x 86 based (Intel or AMD)
Word length
bit
16
Material
Lexan
Voltage
VDC
5.0 V (supplied by I/O Base)
Voltage tolerance
+ 5% (as supplied by I/O Base)
RFI immunity/EMI susceptibility/ Electrostatic
discharge
Meets CE mark for open equipment. Open equipment should be installed in an industry
standard enclosure, with access restricted to qualified service personnel
Di-electric strength
RS 232 is non-isolated from logic common
Indicator lights
Diagnostic and status lights, standard
Power source
Power supply on-board the Momentum I/O Base
Clock speed
MHz
32
Comm ports 1
Dedicated RS 232C Modbus
2
I/O Bus (derivative of Interbus) Dedicated RS 485 Modbus
Capacity 984 LL program memory
K 18
IEC program memory
K 240
data memory
K
24
discrete I/O
8192 In/8192 Out (A total of 8192 bits can be configured for discrete and analog I/O, any mix
up to the stated limits)
register I/O
26048 In/26048 Out (A total of 26048 words can be configured for discrete and analog
I/O, any mix up to the stated limits)
I/O limit
8192 bits (4096 In/4096 Out; I/O can be
extended using a Modbus Plus option Adapter
and Peer Cop)
<local> (No I/O bus port; I/O can be extended
using a Modbus Plus option Adapter (2048 10
pts) and Peer Cop)
scan time
ms/K
1
Characteristics
(continued)
References :
page 48245/8