User guide
48245-EN.fm/2
Schneider Electric
Momentum automation platform 0
M1/M1E processor adapters
Presentation
Characteristics :
pages 48245/4 to 48245/7
References :
page 48245/8
The Momentum M1/M1E processor adapters are based on the Modicon 984 family of
products. You can mount these Adapters on Momentum I/O Bases to provide
intelligence to the I/O. The Processor Adapter can quickly and independently solve
logic, control its own local I/O (discrete or analog), and communicate to other control
entities through one of a number of Momentum communication options. The
Processor Adapter can turn an ordinary I/O Base into a PID controller or high-speed
logic solver.
You can create your own controller from a number of different bases, and with other
Momentum options, network your local logic solvers together into an intelligent
subsystem as part of a larger Modicon application, or into a standalone, integrally
networked system with local controllers with extended I/O. A controller can be added
to the different bases and combined with other Momentum options, which can then be
networked together in an intelligent subsystem as part of a larger Modicon application.
The Momentum I/O Base can be made a standalone, integrally networked system
using local controllers with extended I/O.
The Momentum M1/M1E processor adapters are meant to stand alone, be mounted
on a single Momentum I/O Base (with its own extended Momentum I/O connected to
the I/O Bus Port on Model Number 171 CCS 760 00), or be mounted together with
one of a variety of Momentum Option Adapters, providing different network
capabilities, a time-of-day clock, and a battery back-up system. The built-in flash
memory is used to store the executive, allowing for convenient field upgrades of the
operating system. The flash memory can also be used to back up your applications,
creating a local copy of your program to be loaded back into RAM, thus providing
original program file integrity. On Model Number 171 CCS 780 00, the RS485 port
can be used to connect to dedicated devices such as an operator interface panel or a
marquee, or used in a Master/Slave RS485 network to connect to multiple devices.
The processor adapters can be programmed with Modsoft version 2.5 or greater,
Concept version 2.1 or greater, or ProWORX NxT version 2.0 or greater.
The following table describes the characteristics of the Momentum M1/M1E
processor adapters.
Momentum processor adapters have a number of PC programming software options
available. You can program your Processor Adapter via the Modbus RS232 serial
port, or if using a Modbus Plus Option Adapter in conjunction with a Processor
Adapter, via an SA85 card installed in a PC and connected to the same Modbus Plus
network. For more specific information, see the appropriate Momentum, ProWORX,
Concept, or Modsoft programming software literature and documentation.
Presentation
Characteristics
Processor Adapter
RAM Memory Flash Memory Scan Time Modbus Port I/O Bus Port IEC Executive
171 CCS 700 00
64 K 256 K 1 ms/K 1 x RS 232C – –
171 CCS 700 10
64 K 256 K 0.63 ms/K 1 x RS 232C – –
171 CCS 760 00
256 K 256 K 0.63 ms/K 1 x RS 232C 1xI/OBus Compatible
171 CCS 780 00
64 K 256 K 1 ms/K
1 x RS 232C
1xRS485
– –
171 CCC 760 10
512 K 512 K 1 ms/K 1 x RS 232C 1xI/OBus Compatible
171 CCC 780 10
512 K 512 K 1 ms/K
1 x RS 232C
1xRS485
–
Compatible
171 CCC 960 20
544 K 512 K .3 ms/K 1 x Ethernet 1xI/OBus
–
171 CCC 960 30
544 K 1Mb .3 ms/K 1 x Ethernet 1xI/OBus Supplied
171 CCC 980 20
544 K 512 K .3 ms/K
1xRS485
1 x Ethernet
– –
171 CCC 980 30
544 K 1Mb .3 ms/K
1xRS485
1 x Ethernet
– Supplied
Programming Software for Momentum