User guide

48190-EN.FM/6
Schneider Electric
Momentum automation platform 0
ConneXium industrial Ethernet
Electrical cables
Models 490 NTW 000 pp 490 NTC 000 pp
Cable type
Shielded and foil twisted pair straight-through
cable
Shielded and foil twisted pair crossed cord
Available cable length
m
(ft)
2, 5, 12, 40, 80
(6.5,16.4, 39.4,131.2, 262.4)
5, 15, 40, 80
(16.4, 49.2,131.2, 262.4)
Pre-assembled connector type
RJ45 (two per cable)
Agency approvals and compliance
UL, CSA 22.1 and NFPA 70 approval indicated by "U" after part number (example: 490 NTW
000 40U);
Category 5 of international cabling standard EIA/TIA-568; Class D of IEC 11801 / EN50173;
Low Smoke Zero Halogen (LSZH); flame retardant of NFC32 070 #1 (C2) and CEI 322/1
Optical cables
Models 490 NOC 000 05 490 NOT 000 05 490NOR00005
Pre-assembled connector type
MT/RJ-SC duplex MT/RJ-ST duplex MT/RJ-MT/RJ duplex
Cable type
Standard glass fiber optic
Cable length
m
(ft)
5
(16.4)
Radiation susceptibility
No radiation along the cable
Bridges
Models 174CEV20030 174 CEV 300 10
Networks link
Modbus Plus to Ethernet Modbus to Ethernet
Operating power
110 / 220 VAC, auto sensing 9 ... 30 VDC range; 12 or 24 VDC, nominal
Ports
1 Ethernet 10BASE-T (RJ45),
10BASE-2 (BNC),
10BASE-5 (AUI);
1 dual / single cable Modbus Plus
1 RJ45 port for 10BASE-T cable
Mounting
Vertical panel or horizontal shelf DIN rail
Dimensions W x H x D
mm
(in)
122 x 229 x 248
(4.8x9x9.8)
35 x 95 x 60
(1.4 x 3.7 x 2.4)
Characteristics (continued)
References :
page 48190/7