User guide

48233-EN.fm2
Schneider Electric
12
3
4
The Model 170 LNT 710 00 DeviceNet Communication Adapter for the Momentum
I/O product line provides a direct connection to the DeviceNet Communication
Network for the full family of Momentum I/O modules. This connectivity enables the
Momentum I/O to be used in open architecture control systems with other DeviceNet
compatible control products, including programmable controllers, industrial
computers, operator control stations, drive systems, and other controls, to provide a
flexible, cost-effective solution for distributing I/O modules throughout a large area.
The DeviceNet communication adapter is a single package that is designed to plug
on to any of the Momentum Input/Output modules bases, thus allowing the I/O
module full access to the DeviceNet Communication Network. Each Momentum I/O
module is an individual node on the network with its address user-selected on the
dual rotary switch on the front of the communication adapter.
The adapter complies with the Open DeviceNet Vendor Association (ODVA)
specification Release 2.0 for network communication protocol and data transfer.
Current information about the ODVA specification can be obtained at the ODVA Web
site: http://www.odva.org.
Electronic Data Sheet Disk
An Electronic Data Sheet (EDC) disk is included with the DeviceNet Adapter
´suser
guide (part number 870 USE 104 00). It supplies the application software parameters
for setup of each I/O base. Each file
´s format on the disk complies with the ODVA
specification for DeviceNet I/O module EDS parameters. Updated EDS files are
available for downloading from the Customer Support areas of the Schneider
Automation Web Site and Bulletin Board service.
The 170 LNT 710 00 DeviceNet Communication Adapter comprises on the front
panel :
1 LED Status Indicators comprising :
- PWR (green), power is present from I/O base.
- MNS (green/red), adapter is communicating on network.
- IO (green/red), I/O is active, no faults.
2 DeviceNet Connector.
3 Area for Label (label shipped with I/O base).
4 Rotary switches for slave addresses.
Presentation
Description
Momentum automation platform 0
DeviceNet communication adapter
Presentation,
description