Full Product Manual

8
Setup
To begin using your Momentum device you will first need
to pair it to your Momentum account and then connect it to
your Wi-Fi network.
Pairing
IMPORTANT: Make sure your mobile device is
connected to the same Wi-Fi network as the one you
will be connecting the camera to. (This is required just
for the pairing process; feel free to disconnect your
mobile device from the Wi-Fi network after pairing is
complete if you wish to do so.)
1) Power on the Cori camera.
Once your Cori has been powered on, it should already
be put into pairing mode. There will also be a sound
played to notify you that it’s in pairing mode as well.
- If it’s not in pairing mode, you will need to hold the
reset button for 10 seconds. You should hear a
sound play that the camera is ready to connect.