Operating Guide

9
Installation Requirements
1. To install the Aria, you must already have an existing
floodlight you wish to replace or have a setup location
with an installed junction box and available electrical
wiring.
2. Voltage supplied to the Aria should be between 110-
240VAC.
3. Setup location is recommended to be at least 6 to 10
feet from the ground.
4. Installation should be performed by qualified
electricians who are informed about the standards and
technical requirements of the appliance and its proper
installation.
5. Do NOT connect the Aria to a dimmer switch or timer.
6. Ensure the mounting surface and junction box are
waterproofed and completely sealed.
7. Junction box needs to bear the weight of the entire
device.