Operating Guide

10
Aria Installation
Before you begin:
- Shut OFF the power at the fuse or circuit breaker box.
- DO NOT rely on a wall switch alone to turn off the
power.
- If you’re unsure which switch it is to turn off the
floodlight’s power, please consult with a licensed
electrician.
- This equipment is intended for installation in a restricted
access location. Access can only be gained by service
persons or by users who have been instructed about
the reasons for the restrictions applied to the location
and about any precautions that shall be taken.
- If you plan to perpetually power on device, please add
appropriate disconnecting apparatus and overcurrent
protection device, outside of the device.
- You will likely require a ladder to reach the setup
location. It’s recommended you have someone to assist
you during installation to minimize risk of injury.