Datasheet

PedalSync™
Tru-Foot
TM
LFO chip MV-55(B)
Datasheet - p.15
[e-mail] © 2012 - MoltenVoltage.com - All Rights Reserved.
PedalSync_MV-55_MV-55B_Tru-Foot_LFO_Datasheet.doc DRAFT v9.1
Power Consumption (typical) ~ 90mA
see also:
Microchip dsPIC33FJ64GP802 Datasheet
http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en532310
Module Dimensions
Circuit board: 1.7 x 1.6”
Header pins are spaced 0.1” and the two header strips are 1.5” apart
A complete set of CadSoft Eagle footprints for PedalSync modules is available for download at:
www.PedalSync.com
Related Products
• Use with Voltage Conversion Module to convert output voltage to 0-5v, 9v, 10v, or 12v
• Use with Four Pots chip (MV-56) to save LFO depth and center settings.
• Use with 4 Presets chip (MV-59) to make a stand-alone device that can store and recall four
programs. MV-59 can be connected directly to MV-55(B) Pin 21 with a 330 ohm resistor in series
in stand-alone devices.
Support
[e-mail]
DISCLAIMER
Information contained in this publication regarding device applications and the like is provided only for
your convenience and may be superseded by updates. It is your responsibility to ensure that your
application meets with your specifications.
MOLTEN VOLTAGE MAKES NO REPRESENTATIONS
OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL,
STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT
LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS
FOR PURPOSE.
Molten Voltage disclaims all liability arising from this information and its use. No
licenses are conveyed, implicitly or otherwise, under any Molten Voltage intellectual property rights.
PedalSync, Tru-Foot, Molten Voltage, Visionary Effects, “Design simple Design sublime”, and “the future just showed up”
are all trademarks of Molten Voltage.
[e-mail]