Datasheet

PedalSync™

Tru-Foot

LFO chip MV-55(B)

Datasheet - p.10

PedalSync_MV-55_MV-55B_Tru-Foot_LFO_Datasheet.doc DRAFT v9.1

Module

The Tru-Foot LFO Module does not include all the external connections shown in the schematic. The

available connections are set forth in the Table of TRU-FOOT LFO Module v 1.1 Pin Assignments,

below.

Input and Output header pins are provided for all necessary connections, but

series resistors are

necessary for many of the LEDs

. Please refer to the Table of TRU-FOOT LFO Module v 1.1 Pin

Assignments for more information.

The Module accepts 9-volt DC input, and provides regulated, filtered power for the 3.3 and 5 volt

circuits, as well as off-board connections for both voltages and the isolated grounds (AG and DG).

Refer to the schematic, below, for information on connecting pots, MIDI Jacks, and switches.