Specifications

3
Structure of this manual
This manual describes step by step functions of GSM communications module CommandCall CC2, the
format of SMS control commands and reports sent to the user, unit controls via phone call with tone dial
functions, control via in the vehicle installed ON/OFF push button and gives mounting instructions for unit
installation in the vehicle and its connection with the independent heater.
Chapters 1 to 5 are important for the user and partially also chapter 6 describing PC Setup parameters
setting. Other chapters are dedicated for personel who installs unit in the vehicle and performs start-up
procedure.
Separate chapter (Chapter 12) is describing SW tools installations necessary for parameter setting before
unit installation in the car. This information is not directly relevant to CommandCall CC2 functions, SW
tools may be necessary in process of the unit installation in the vehicle.
Basic commands overview is helpful tool for the heater control in form of credit card which can be kept by
the user all the time ready to use.
this sign shows important warnings and remarks in this manual
1. Items supplied
1.1. GSM CommandCall CC2 consists of following parts:
1. Control unit 2. Heater wire harness 3.- 6. Connectors / terminals
7. Accessories wire harness 8. ON/OFF push button 9. GSM antenna