Specifications

g. accept final Installation step of the CP210x_VCP_Win2K_XP_S2K3.exe program:

h. run „Device Manager“ on your PC to check results of USB to COM port converter installations and

check designated COM port number:

Note: in used example you can see, that on respective computer COM9 is designated to USB

Programming Adapter.

For each single installation another COM port can be designated to USB Programming Adapter,

but if the installation is not changed, CommandCall USB Programming Adapter will be

designated to the same COM port even when inserted to another USB on the computer.

Designated COM port depends on computer configuration and it is possible to find designated

COM port by checking one by one from the list or to find designated COM port directly by

following procedure:

Designated COM port for USB to COM port converter you can recognize by the text „CP210x USB to UART

Bridge Controller“ in name of the respective port in the list of available COM ports followed by the number of

COM port.