Specifications

6.1. Password settings

This part is used for change of password and for enabling/disabling usage of the user password.

Default: returns user password value back to factory preset value 1234. Default does not change

PIN code of the SIM card inserted into CommandCall control unit.

Change password: opens input fields for new password and its reconfirmation

Password disable: allows user to send SMS commands without user password when this checkbox is

activated, system will execute received command without password validity check.

6.2. Phone numbers for sending SMS

This section enables to store VIP phone numbers to be used for sending SMS reports and these users can

switch ON heater/ventilation by phone call ringing and for tone dial phone calls without need to enter

password.

6.3. SMS settings

Every single SMS, where it is reasonable to enable/disable separately option of its sending, has

a checkbox for activating SMS sending (when the checkbox is marked ). For some messages (which

have tripple check box) it is possible to assign up to 3 VIP phone numbers where the message will be sent.

Sent SMS reports can contain characters of English alphabet and numbers, no local characters

are supported and the maximum length of a message is 30 characters.

SMS reports confirming receipt and executing of the SMS command controlling the

heater are sent to the phone number from which was the command sent.

SMS commands sent from free SMS gates of internet providers may be in some cases ignored

(SMS commands starting with text information are intentionally ignored, because the format of

SMS command is fixed and all SMS commands must start with number).

Each text field of SMS report in CommandCall PC Setup must contain at least one character,

otherwise PC Setup will give error message to the user „SMS detail is null“ and the PC Setup

settings as showed on the PC Setup screen can not be written to the memory of CommandCall

control unit.

SMS reports are a kind of a feed back information on heater operation so it is important to

enable sending at least SMS reports when heater/ventilation is switched ON.