Specifications

ManualsBrandsMolpir ManualsTelephonesCommandCall CC2

Code

Command Description Text of SMS report

Check

box

SMS

581 Setting all "triple" checkboxes SMS command in form xxxx581-T1=PPP,T2=PPP,

...,T12=PPP (xxxx is user password) will set all

checkboxes as specified by respective P. Each P

represent position of stored golden phone number

(accepted values 0 to 6).

581 OK 17 fix

680 Request on actual values of all

parameters

SMS command in form xxxx680 (xxxx is user password)

will return SMS with actual values of all parameters

680-HTP=mmm,AP=s.s,APH=sss,CBV=vv.v,VS

=sss,PTD=dd,PTH=hh,PTM=mm,UST=±ttt.t,TS=sss,

UST1=±ttt.t,UST2=±ttt.t,TS1=sss,LANG=ll

- fix

681 Setting all parameters SMS command in form xxxx681-HTP=mmm,AP=s.s,

APH=sss,CBV=vv.v,VS=sss,PTD=dd,PTH=hh,PTM=m

m,UST=±ttt.t,TS=sss,UST1=±ttt.t,UST2=±ttt.t,TS1=sss,

LANG=ll (xxxx is user password) will set all checkboxes

as specified.

681 OK 17 fix

SMS command in form xxxx781-NNNN (xxxx is user

password) will change user password from xxxx to

NNNN

Password change OK 17 44

Command in form xxxx781 (xxxx is user password) will

disable using of user password.

Password disable 17 45

781 User password change

Command in form 781-NNNN will restore using of user

password and will set its new value to NNNN.

Password change OK 17 44

Note:

• VIP phone numbers do not use the password even when regular users has to use it. However, if VIP user sends SMS command with valid password such

command is accepted

• F is used as temperature unit (°Fahrenheit) instea d of C (°Celsius) when checkbox No.19 is activated

• accepted values range is shown in hapter 6 of this manual

• SMS report format shown in column “Text of SMS report“ is for indication only, in mobile phone are the fields with values placed on new line for easier

readings

Sample of setting checkboxes by SMS command 481:

SMS command in format xxxx481-1001111101010100000001010000 sets single checkboxes No.. 1, 4, 5, 6, 7, 8, 10, 12 14, 22, 24 to activated status („1“)

and checkboxes No. 2, 3, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21, 23, 25, 26, 27, 28 to deactivated status (“0”), xxxx is user password.

Note: For reseting checkboxes to new values by SMS command 481 is suggested to read actual seting by command xxxx480 (xxxx is user password)

and then to edit received SMS report to command 481 format.