Specifications

10
Code
Command Description Text of SMS report
Check
box
SMS
120 Switch ON the heater/ventilation for
120 minutes
SMS command in form xxxx120 (xxxx is user password)
will switch ON the heater or ventilation, sends SMS No. 4
or 8 (depending on last used status heating/ventilation).
120 minutes later system will switch heater/ventilation
OFF.
Heater ON by SMS, 120 min., ± ttt.tC, vv.vV or
Ventilation ON by SMS, 120 min., ± ttt.tC, vv.vV.
NOTE: remaining time must be shown regardless
checkbox 30 setting.
4 or 8 4 or 8
280 Request for one of Phone
number / checkbox setting /
parameter value
SMS command in form xxxx280-PP (xxxx is user
password) will return SMS with actual value/setting of
requested PP (Following PP can be accepted: P1 to
P6, S1 to S28, T1 to T12, HTP, AP, APH, CBV, VS, PTD,
PTH, PTM, UST, TS, UST1, UST2, TS1, LANG)
280-
PP=yyy...yyy
(yyyyyy is value/actual setting of requested phone
number / checkbox / parameter)
- fix
281 Setting of one phone number /
checkbox / parameter
SMS command in form xxxx281-PP=yyy...yyy (xxxx is
user password) will set PP to new value/setting yyy...yyy
(accepted PP can be: P1 to P6, S1 to S28, T1 to T12,
HTP, AP, APH, CBV, VS, PTD, PTH, PTM, UST, TS,
UST1, UST2, TS1, LANG)
281 OK 17 fix
380 Request for all VIP phone numbers SMS command in form xxxx380 (xxxx is user password)
will return SMS containing all VIP phone numbers
380-P1=TTT...T,P2=TTT...T,P3=TTT...T,
P4=TTT...T,P5=TTT...T,P6=TTT...T
- fix
381 Setting all VIP phone numbers SMS command in form xxxx381-P1=TTT...T,P2=
TTT...T,P3=TTT...T,P4=TTT...T,P5=TTT...T,P6=TTT...T
(xxxx is user password) will set all VIP phone numbers to
specified values
381 OK 17 fix
480 Request on actual setting of all
"single" checkboxes
will return SMS with sequence of 28 characters „0“ or „1“,
where each “0” means respective checkbox is
deactivated and „1“ means respective checkbox is
activated. The position in the sequence gives number of
the respective checkbox (1 - 28)
480-NNNN.......NNNNN - fix
481 Setting all "single" checkboxes SMS command in form xxxx481-NNN...N (xxxx is user
password) will set all checkboxes as specified by
respective N. Each N can contain „0“ for deactivating and
„1“ for activating of respective checkbox. The serial
number of respective checkbox is given by position in
sequence (1-28)
481 OK 17 fix
580 Request on actual setting of all
"triple" checkboxes
SMS command in form xxxx580 (xxxx is user password)
will return SMS with information on settings of all "triple"
checkboxes (T1 to T12). Every of these triple
checkboxes has 3 fields for giving golden phone number
from the list where specific SMS should be sent.
580-T1=PPP,T2=PPP,...,T12=PPP - fix