Specifications

9
3.1.3. SMS control commands
Code
Command Description Text of SMS report
Check
box
SMS
0 Switch OFF the heater / ventilation
SMS command in form xxxx000 (xxxx is user password)
will switch OFF the heater (ventilation) and SMS report
No.1 is sent
Eberspaecher OFF by SMS, ± ttt.tC, vv.vV 1 1
SMS command in form xxxx001 (xxxx is user password)
will switch ON the heater for preset time and SMS No.4
is sent. When preset time expires system will switch OFF
the heater.
Heater ON by SMS, MMM min., ± ttt.tC, vv.vV 4 4 1 Switch ON the heater for preset time
in range 1 to 120 minutes or
unlimitted
If preset heating time HTTP=999 then heater is switch
ON for unlimitted time and SMS No.12 is sent.
Heater ON unlimitted, ± ttt.tC, vv.vV 12 12
SMS command in form xxxx002 (xxxx is user password)
will switch ON the ventilation for preset time and SMS
No.8 is sent. When preset time expires system will
switch OFF ventilation.
Ventilation ON by SMS, MMM min., ± ttt.tC, vv.vV 8 8 2 Switch ON ventilation for preset time
in range 1 to 120 minutes or
unlimitted
If preset heating time HTTP=999 then ventilation is
switch ON for unlimitted time and SMS No.13 is sent.
Ventilation ON unlimitted, ± ttt.tC, vv.vV 13 13
3 User request on actual status (Status
SMS)
SMS command in form xxxx003 (xxxx is user password)
sends Status SMS describing actual state of the device.
Status SMS consist of several information fields.
see Status SMS description
4 Activate external clock
SMS command in form xxxx004 (xxxx is user password)
enables controll of the heater/ventilation by external
clock, activates checkbox No.27 and sends SMS No.14.
External clock activated 14 14
5 Deactivate external clock
SMS command in form xxxx005 (xxxx is user password)
disables controll of the heater/ventilation by external
clock, deactivates checkbox No.27 and sends SMS
No.15.
External clock deactivated 15 15
010 Switch ON the heater/ventilation for
10 minutes. Selection of heating or
ventilation is according to the last
used staus.
SMS command in form xxxx010 (xxxx is user password)
will switch ON the heater or ventilation, sends SMS No. 4
or 8 (depending on last used status heating/ventilation).
10 minutes later system will switch heater/ventilation
OFF
Heater ON by SMS, 10 min., ± ttt.tC, vv.vV or
Ventilation ON by SMS, 10 min., ± ttt.tC, vv.vV.
NOTE: remaining time must be shown regardless
checkbox 30 setting.
4 or 8 4 or 8
011 Switch ON the heater/ventilation for
11 minutes. Selection of heating or
ventilation is according to the last
used staus.
SMS command in form xxxx011 (xxxx is user password)
will switch ON the heater or ventilation, sends SMS No. 4
or 8 (depending on last used status heating/ventilation).
11 minutes later system will switch heater/ventilation
OFF.
Heater ON by SMS, 11 min., ± ttt.tC, vv.vV or
Ventilation ON by SMS, 11 min., ± ttt.tC, vv.vV.
NOTE: remaining time must be shown regardless
checkbox 30 setting.
4 or 8 4 or 8
12-1
19
Switch ON the heat./vent.for 12 to
119 min.
. . . . . . 4 or 8 4 or 8