Datasheet

Hand Crimp Tool Quick Disconnect, Female Crimp Terminals
Doc No: ATS-638279300 Release Date: 12-02-15 UNCONTROLLED COPY Page 6 of 7
Revision: A Revision Date: 12-02-15
CAUTIONS:
1. Manually powered hand tools are intended for low volume or field repair. This tool is NOT intended for
production use. Repetitive use of this tool should be avoided.
2. Insulated rubber handles are not protection against electrical shock.
3. Wear eye protection at all times.
4. Use only the Molex terminals specified for crimping with this tool.
Certification
Molex does not certify or re-certify hand tools but rather supplies the following guidelines for customers to re-certify
hand tools.
 This tool is qualified to pull force only. See the Molex web site for the Quality Crimp Handbook for more
information on pull testing.
 If the tool does not meet minimum pull force values, handle preload should be increased and the pull test
rerun, (See How to Adjust Preload).
 When the hand tool is no longer capable of achieving minimum pull force, it should be taken out of service and
replaced.