Datasheet
Manual Wire Stripper Tool
Doc No: ATS-638170000 Release Date: 10-29-10 UNCONTROLLED COPY Page 2 of 3
Revision: A Revision Date: 10-29-10
OPERATION
Follow the steps below for stripping the wire or cable.
CAUTION: Always keep hands and fingers out of the cutting area!
1. Squeeze the sides of the wire
stop to adjust the strip
length.
2. Position the wire stop to the
strip length desired
3. Adjust the stripping
blades for the insulation
thickness.
4. Place the wire against the
wire stop.
5. Squeeze the tool handles together to
strip the wire.
6. For strip lengths over 18mm, move the
wire stop all the way to the back and
bend the excess wire outside the tool.
7. Squeeze the tool handles together to
strip the wire.
Wire Cutting Function.
1. Place the wire in the opening of the cutter.
2. Squeeze the tool handles together to cut the wire.
WARNING:
For Wire Cutter Only
Do not use this tool to cut hardened objects.