Datasheet

63813-0400 Extractor Tool
Doc No. 63813-0400 Release Date: 04-23-03 UNCONTROLLED COPY Page 1 of 1
Revision: F Revision Date: 03-01-06
Extractor Tool
Instruction Sheet
Order No. 63813-0400
Mini-Fit Sr. Terminal
This tool is a hand tool designed to extract the male and female Mini-Fit Sr. terminals (42815 and 42817 Series) from their
appropriate housings. This tool measures 9.5mm (.38”) square by 101.6 mm (4.0”) long and weights about .050 kg (1.7 oz).
OPERATION:
1. Remove the TPA
2. Insert the tool into the housing as shown in Figure 1.
3. Use the slots located inside of the housing to guide the extraction
tool into the housing.
4. Continue to insert the tool until tabs on the sides of the housing
are pushed aside (tool bottoms). Male terminal is shown in
Figure 2, the alignment for the female is the same.
5. Gently pull the wire out of the housing once the tabs are pushed
apart.
Molex Application Tooling Group
2200 Wellington Court
Lisle, IL 60532
Tel: [phone]
Fax: [phone]
Visit our Web site at http://www.molex.com
LOCKING TABS
Fi
g
ure 2
WIRE
TERMINAL
(MALE)
EXTRACTOR TOOL
HOUSING
TOOL MUST BE
ALIGNED AS
SHOWN; IT WILL
NOT WORK
ROTATED 180
°
HOUSING
EXTRACTOR
TOOL
Figure 1
PULL
WIRE
REMOVE TPA