Datasheet

ManualsBrandsMolex ManualsConnector ToolsCrimping tool, Mini-Fit Sr 14 AWG 16 AWG

Hand Crimp Tool for Mini-Fit Sr. ™ Grounding Crimp Terminals

Doc No: ATS-638113800 Release Date: 02-19-03 UNCONTROLLED COPY Page 1 of 4

Revision: C Revision Date: 04-24-08

BELL MOUTH

WIRE

INSULATION

CONTACT GAP

0.00mm - 0.05mm

SEAM

3.75mm ±

±±

± 0.20

3.75mm ±

±±

± 0.20

CONTACT GAP

1.00mm ±

±±

± .20

BEND

DOWN

TWISTING

ROLLING

BEND

Hand Crimp Tool

Specification Sheet

Order No. 63811-3800

FEATURES

% A full cycle ratcheting hand tool ensures complete crimps

% Ergonomically designed soft handles

% Precisely designed crimping profiles with simple contact positioning

% Easy handling due to outstanding force ratio

SCOPE

Products: 10.00mm (.393") Pitch Mini-Fit Sr. ™ Male and Female Grounding Crimp Terminals, 14-16 AWG.

Terminal Order No. Wire Size

Insulation Diameter

Maximum

Strip Length

Terminal

Series No.

Loose

●

Reel AWG mm² mm In. mm In.

42815-0040 42815-0048

42815-0041 42815-0049

42815

42815-0042

14-16 2.00-1.30 3.33 .131 4.25-4.75 .167-.187

42817-0040 42817-0140

42817-0041 42817-0141

42817-0042 42817-0142

42817-0048 42817-0149

42817

42817-0049

14-16 2.00-1.30 3.33 .131 4.25-4.75 .167-.187

●

Customer to cut off terminal from reel: 0.50mm (.020”) maximum Cut-off Tab.

DEFINITION OF TERMS

The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope.

TYPE 4A

Summary of content (4 pages)

PAGE 1
Hand Crimp Tool for Mini-Fit Sr. ™ Grounding Crimp Terminals Hand Crimp Tool Specification Sheet Order No. 63811-3800 FEATURES % % % % TYPE 4A A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles with simple contact positioning Easy handling due to outstanding force ratio SCOPE Products: 10.00mm (.393") Pitch Mini-Fit Sr. ™ Male and Female Grounding Crimp Terminals, 14-16 AWG. Terminal Series No. Terminal Order No.
PAGE 2
Hand Crimp Tool for Mini-Fit Sr. ™ Grounding Crimp Terminals CONDITIONS: After crimping, the crimp profiles should measure the following (see notes on page 3). Terminal Series No. 42815 42817 Wire Size AWG 14 16 14 16 mm2 2.00 1.30 2.00 1.30 Conductor Crimp Height (REF) Width (Ref) mm In. mm In. 1.89-1.99 .074-.078 3.20 .126 1.82-1.92 .072-.075 3.20 .126 1.89-1.99 .074-.078 3.20 .126 1.82-1.92 .072-.075 3.20 .126 Insulation Crimp Width (Ref) mm In. 4.50 .177 4.50 .177 4.50 .177 4.50 .
PAGE 3
Hand Crimp Tool for Mini-Fit Sr. ™ Grounding Crimp Terminals Miscrimps or Jams Should this tool ever become stuck or jammed in a partially closed position, Do Not force the handles open or closed. The tool will open easily by lifting the ratchet release lever. See Figure 3. Warranty This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital components are long life tested.
PAGE 4
Hand Crimp Tool for Mini-Fit Sr. ™ Grounding Crimp Terminals PARTS LIST Item Order Number Description Quantity 1 63600-0520 Crimping Spring 2 2 63811-3875 Locator 1 3 63600-0525 Handle Spring 1 M4 X 12mm LONG BHCS RATCHET RELEASE LEVER 2 BEL 3 LOCATOR 1 HANDLE SPRING CRIMPING SPRING (2) Figure 3 Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.com Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 feninfo@molex.