Datasheet

This document was generated on 07/29/2019
PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION
Part Number:
0431603102
Status:
Active
Overview: Sabre Power Connector
Description: Sabre Right-Angle Header, 2 Circuits, Glow-Wire Capable, PCB Thickness 1.60mm,
with Board Lock
Documents:
Drawing (PDF) Packaging Specification PK-43789-001-001 (PDF)
3D Model RoHS Certificate of Compliance (PDF)
Product Specification PS-44441-9999-001 (PDF) Product Literature (PDF)
Agency Certification
CSA LR19980
UL E29179
General
Product Family PCB Headers
Series 43160
3D Viewer Yes
Application Power, Wire-to-Board
CURRENT-MAX-NUMERIC 18.0
Comments """""""Fully Polarized, high power wire to board and
wire to wire connector system<P><P>This Molex
product is manufactured from material that has the
following ratings, tested by independent agencies:.
a) A Glow Wire Ignition Temperature (GWIT) of at
least 775 deg C per IEC 60695-2-13.. b) A Glow
Wire Flammability Index (GWFI) above 850 deg C
per IEC 60695-2-12.and hence complies with the
requirements set out in the International Standard
IEC 60335-1 5th edition - household and similar
electrical appliances - safety, section 30 Resistance
to heat and fire. <P><P> The customers using this
product must determine its suitability for use in
their particular application through testing or other
acceptable means as described in end-product glow-
wire flammability test standard IEC 60695-2-11 and
any applicable product end-use standard(s). <P> If
it is determined during the customer’s evaluation of
suitability, that higher performance is required, please
contact Molex for possible product options.""""""",
"""""""Fully Polarized, high power wire to board and
wire to wire connector system<P><P>This Molex
product is manufactured from material that has the
following ratings, tested by independent agencies:.
a) A Glow Wire Ignition Temperature (GWIT) of at
least 775 deg C per IEC 60695-2-13.. b) A Glow
Wire Flammability Index (GWFI) above 850 deg C
per IEC 60695-2-12.and hence complies with the
requirements set out in the International Standard IEC
60335-1 5th edition - household and similar electrical
appliances - safety, section 30 Resistance to heat
and fire. <P><P> The customers using this product
must determine its suitability for use in their particular
application through testing or other acceptable means
as described in end-product glow-wire flammability test
standard IEC 60695-2-11 and any applicable product
Series image - Reference only
EU ELV
Not Relevant
EU RoHS China RoHS
Compliant
REACH SVHC
Not Contained Per
-ED/88/2018 (15
January 2019)
Halogen-Free
Status
Not Low-Halogen
For more information, please visit Contact US
China ROHS Green Image
ELV Not Relevant
RoHS Phthalates Not Contained
Search Parts in this Series
43160 Series
Mates With
444412002 Sabre Receptacle Housing